X-86 based system family model 58 stepping 9 genuine intel ~2893 MHZ
A couple of issues I am hoping for some help with
Collapse
This topic is closed.
X
X
-
When you installed the 32 bit did you reformat the drive or just load over top of the 64
Did you try the 64 drivers when you had 64 loaded.
Sorry this is taking so long. Just something not right somewhere I can’t put my finger on it yet.Comment
-
A couple of more things- are you using a usb now or still dvd. If dvd copy the 32 bit network driver to your desktop - will it run?
- If no click on start >Right click my computer >Left click Properties>Left Click Hardware Tab>Left click device manager
Left Click + sign next to IDE ATA/ATAPI controllers Right click Primary IDE channel>Left click Properties> Left Click Advanced settings
Make sure Transfer mode is set to DMA or DMA if available
Try the exe file again.
Pic attached
Comment
-
If the above does not work and you have a usb stick (to save dvd’s) Try this it is a zip file
Intel driver
Sorry for so many different post - Just try to give as much info as I can because of the time difference
Say if it is overwhelming.
Cheers
PeterOzComment
-
Originally posted by PeterOzWhen you installed the 32 bit did you reformat the drive or just load over top of the 64
Did you try the 64 drivers when you had 64 loaded.
Sorry this is taking so long. Just something not right somewhere I can’t put my finger on it yet.Comment
-
Originally posted by PeterOzWhen you installed the 32 bit did you reformat the drive or just load over top of the 64
Did you try the 64 drivers when you had 64 loaded.
Sorry this is taking so long. Just something not right somewhere I can’t put my finger on it yet.Comment
-
Originally posted by PeterOzA couple of more things- are you using a usb now or still dvd. If dvd copy the 32 bit network driver to your desktop - will it run?
- If no click on start >Right click my computer >Left click Properties>Left Click Hardware Tab>Left click device manager
Left Click + sign next to IDE ATA/ATAPI controllers Right click Primary IDE channel>Left click Properties> Left Click Advanced settings
Make sure Transfer mode is set to DMA or DMA if available
Try the exe file again.
Pic attached
Comment
-
Originally posted by PeterOzIf the above does not work and you have a usb stick (to save dvd’s) Try this it is a zip file
Intel driver
Sorry for so many different post - Just try to give as much info as I can because of the time difference
Say if it is overwhelming.
Cheers
PeterOzComment
-
which I assume has something to do with the lack of video drivers.
Correct
Originally posted by TheMUBMmedia not connected, check cable.Comment
Comment