I've installed windows 10 onto my SSD. It was a clean install. After restarting I expect to be able to see my m.2 as a bootable drive but I do not. I've disabled CSM and have tried a few other basic steps following a few tutorials but nothing works. Can someone please help?
-
Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.
Why not Click Here To Sign Up and start enjoying great FREE Tech Support.
This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
Why wont Windows load feom m.2 NVME SSD?
- Thread starter camp2022
- Start date
-
- Tags
- m.2 nvme os install ssd
- Status
ASUS - ROG Strix X570-E Gaming ATX Motherboard
Ryzen 7 5800x
Xfx Amd Radeon Rx 570 8gb
2x16 DOMINATOR® PLATINUM RGB 32GB (2x16GB) DDR5 DRAM 6200M
WD_Black 1TB m.2 NVME SSD
I am trying ti see it through the bios. When I installed it windows the drive shows up to install it on but that's it.
Ryzen 7 5800x
Xfx Amd Radeon Rx 570 8gb
2x16 DOMINATOR® PLATINUM RGB 32GB (2x16GB) DDR5 DRAM 6200M
WD_Black 1TB m.2 NVME SSD
I am trying ti see it through the bios. When I installed it windows the drive shows up to install it on but that's it.
You information is some confusing lets clear that up.
Make and model of the PSU?
Where and how was the Windows 10 install media created?
Does the system boot if windows got installed?
What if any error messages are you seeing?
After the clean install did you install the drivers in the proper order?
Is the M.2 replacement for an M.2 or SSD or HDD that is still or was attached to the system?
What version of BIOS are you using?
You will need to refer to the manual for the motherboard.
Make and model of the PSU?
you have and or have not been able to install windows?
Where and how was the Windows 10 install media created?
Does the system boot if windows got installed?
What if any error messages are you seeing?
After the clean install did you install the drivers in the proper order?
Is the M.2 replacement for an M.2 or SSD or HDD that is still or was attached to the system?
Have you referred to the motherboards manual for any setting that may need to be done for the BIOS to recognize the M.2 properly for it to work as a boot device and not storage?
What version of BIOS are you using?
Is this drive combatable with the motherboard and processor?
You will need to refer to the manual for the motherboard.
- Status