Is this PC doomed ?

[Shinichi]

Hope this helps.

Operating system name Microsoft Windows 10 Professional
Version 10.0.10240 Number 10240
Other operating system description Not available
Operating system manufacturer Microsoft Corporation
DESKTOP-E5TOGTI computer
Manufacturer To Be Filled By OEM
Model To Be Filled By OEM
pe
Reference (SKU) of the To Be Filled By OEM system
Intel(R) Core™ i3 CPU M 350 @ 2.27GHz, 2260 MHz, 2 core(s), 4 logical processor(s)
BIOS Version/Date American Megatrends Inc. 080015, 02/04/2015
SMBIOS version 2.6
Embedded controller version 255.255
Legacy BIOS Mode
Base board manufacturer INTEL
Base map model Not available
Base card name Base card
Role of
Secure Boot Status Not supported
PCR 7 configuration Unable to link
Windows directory C:\Windows
System directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Regional option France
Hardware Abstraction Layer Version = “10.0.10240.16392”
User DESKTOP-E5TOGTI\MAXI
Afr time zones Central West
Physical memory (RAM) installed 4.00 GB
Total physial memory 3.80 GB
Available physical memory 2.65 GB
Total virtual memory 4.05 GB
Available virtual memory 3.02 GB
Space for paging file 256 MB
Page file C:\pagefile.sys
Hyper-V - Virtual Machine Monitor Mode Extensions Yes
Hyper-V - Second Level Address Conversion Extensions Yes
Hyper-V - Virtualization enabled in firmware Yes
Hyper-V - Data Execution Protection Yes

[PeterOz]

no name on the case?
Did you check the bios?
You could try this
Reinstall Win 10 Fresh Install. THIS WILL DELETE ALL DATA ON THE DRIVE.

Make sure you only have the one (1) drive you want to install windows on connected.

Download the win 10 tool run it to recreate the flash drive – Must be minimum 8GB

Download Windows 10

Watch this video
How To Install Windows 10 From USB - YouTube

In the video at 2:35 Where to install Windows. Highlight each partition and delete.

Then install on the unallocated space.

In the video at 2:54 you will notice it restarts the computer.
When you are doing this and you get to that point Remove the usb stick whilst it is restarting.
Also if you want to setup a local account instead of logging in with a Microsoft account
Turn off your wireless network and or remove the network cable.
This point is 3.32 in the video - Choose I don’t have internet.
If you want to log in with a Microsoft account then leave the network as is.

Before doing any install, it is a good idea to go to the support page for your system. Download the drivers you are going to need i.e. chipset, sound, video, wireless, etc. Whilst Win10 has a lot of native drivers, Microsoft drivers are designed for ease of use and are NOT designed for any type of performance. Store these drivers on another usb or you can even just make a folder on your install usb when you are finished making the install usb. Copy the drivers into that folder.

When you are finished with the Windows install, then install your drivers.

[ul]
[li]Chipset or Motherboard[/li][li]Sata or hard drive[/li][li]Video adapter[/li][li]Network interface card (NIC)[/li][li]Audio[/li][li]Touchpad[/li][li]Any other hardware drivers needed for your particular model.[/li][/ul]
Reboot after installing the drivers

[Shinichi]

Did everything but there’s still unknown drivers on device manager even with unplugging everything and downloading updates, i did a clean install of windows 10 before and didn’t solve anything.

[Shinichi]

i searched for the PCI ID of these unknown drivers and found nothing and no updates, it’s really hard to see what’s the issue

[Shinichi]

and i tested the CPU management settings and nothing changed too, even after disabling them i still got a bsod.

[Malnutrition]

i did a clean install of windows 10 before and didn’t solve anything.

I think you should do a clean install of windows 10 on the new HDD do not do an upgrade from windows 7

[PeterOz]

you memtest to test ram.

[Shinichi]

I think you should do a clean install of windows 10 on the new HDD do not do an upgrade from windows 7

the new hdd has windows 10 and got bsod, both of the hdd have unknown devices in device manager idk if that’s something i mean could it be a hardware issue since no matter what updates and windows installation it’s the same bsod’s…

[Shinichi]

you memtest to test ram.

alright i’ll try

[Malnutrition]

Yes but it is an update from 7, not a fresh install

[Shinichi]

no it’s not, the new hdd is fresh install windows 10 but the old one isn’t

[Malnutrition]

Post 13 you said differently.

Just going by what you said. ???♂️

[Shinichi]

Isn’t that what i said ? The old hdd has windows 10 upgrade but the new one is fresh install windows 10

[Shinichi]

you memtest to test ram.

No errors have been found

[Rustys]

Look and see if you can find the information printed on the motherboard itself.

Maybe include pictures if you can and or not sure.