Please help with my pc

[phillpower2]

okay im 85% sure that its the processor that causes the 4 beeps cause i have only installed ram ,hard drive, motherboard, power supply,and the processor,i have the video card in a box

Under no circumstances should you be powering up the system without having cleaned off the old thermal paste and re applied the correct amount of fresh paste as described at the link that I provided in my reply #16, for your convenience link here and yes the old paste must be removed from the heatsink as well before you tint it.

[eemil]

yes!!! D the beeping stopped now i wait somebody to help me wtih installinmg the hard drive and graphics card
i think it was the memory i changed it place to a diffrent one

[phillpower2]

Hello eemil,

yes!!! D the beeping stopped now i wait somebody to help me wtih installinmg the hard drive and graphics card

What is the situation with the computer now.

[eemil]

Hello eemil,

What is the situation with the computer now.

umm i have it i just need to wait for my friend to come over and we are going to install the graphics card

[phillpower2]

Sorry but what I meant was have you now got the CPU/Thermal paste sorted and can get to the BIOS screen.

[eemil]

Sorry but what I meant was have you now got the CPU/Thermal paste sorted and can get to the BIOS screen.

yeah but i havent installed the graphics card yet

[phillpower2]

Ok, will wait on your next update, hopefully no beeps means that you will soon be up and running.

Fitting a graphics card is pretty straight forward, you insert it into the slot, connect the power connection from the PSU (6 pin here I do believe) connect the video cable to the card and the screen, connect the mains power, power up and hopefully get a display, a basic guide here

[eemil]

Ok, will wait on your next update, hopefully no beeps means that you will soon be up and running.

Fitting a graphics card is pretty straight forward, you insert it into the slot, connect the power connection from the PSU (6 pin here I do believe) connect the video cable to the card and the screen, connect the mains power, power up and hopefully get a display, a basic guide here

ok so no beeps but when i putted my keyboard and mouse in to the motherboard keyboard and mouse didnt light up i havent installed the graphics card yet and i havent installed the hard drive

[phillpower2]

You can do nothing until the video card and hard drive have been fitted, the computer will fail the power on self test (POST) without them.

[eemil]

You can do nothing until the video card and hard drive have been fitted, the computer will fail the power on self test (POST) without them.

ok thanks

[eemil]

im typing this from my new pc thanks for all the help

[jmarket]

It appears that this issue is resolved, therefore I am closing the topic. If that is not the case and you need or wish to continue with this topic, please send me or any staff member a Personal Message (PM) that you would like this topic re-opened.