Red cpu debug light on and my display for the monitor is black and says no connection

[uniseslayer]

Hi I just built my pc and I set up and once I turned it on everything worked well but I have a cpu debug light on and my monitor says no connection I tried updating bios using the flash button and I reseatted the ram and cpu but it didn’t work please help
SPECS:
I7- 12700k
Msi z690 edge WiFi ddr4
Asus 4070 OC Dual

[uniseslayer]

Here are the pics

[PeterOz]

Could you also include the power supply specs E.g Cooler Master 850W Gold V2 NOT E.g 850w
What ram are you using - and speed
Did you remove the plastic cover on the ram chip
Did you use thermal paste?
have you tried without the GPU

[uniseslayer]

Yes I tried without the gpu I have the Corsair vengeance ddr4 3600 MHz for my cooler I got the LS720 se by deep cool and my power supply is the corsair rme 80+ 750 W gold

[PeterOz]

Did you remove the plastic cover on the ram chip
Did you use thermal paste?

And these two? - Not trying to be funny. This happened just recently.
Your ram is not compatible with your CPU. However, it should not be the cause.
Can you try with just 1 stick of ram.
https://ark.intel.com/content/www/us...-5-00-ghz.html

[PeterOz]

Put 1 stick of ram into Slot A2
Have you connected the cpu power to the cpu1 connection.
Is your cooler connected to the CPU Fan1 or the cpu Pump1

[PeterOz]

Looking at Pic 0111 It looks like the cpu power is not connected.
I cannot be 100% sure because it goes blurry when enlarged.

[Bruce]

@uniseslayer - any update?

[Bruce]

Closing - no activity.
To request a re-open, go to Members > Staff Members, click a Staffer then Start Conversation and quote thread name.