Hi there,
I built my new PC today with the following specs:
Corsair 200r case
I5 10600kf cpu
Asus prime Z490-P motherboard
Gtx 1060 6gb gpu
Corsair VS650 (650W PSU)
WD BLUE M.2 drive
Corsair vengeance lpx 32gb 3000mhz RAM
After building it and turning it on initially I noticed that it seemed very quiet and there was no image on my monitor. After further inspection I noticed that the cpu fan isn’t running at all, and that the other fans seem to be running very sluggishly. Ive looked at it over and over ensuring everything is connected correctly and by this point I feel like I’m going crazy! I’ve tried all of the below:
Reinserting the RAM
Changing RAM slots
Trying one stick of RAM instead of two
Reinserting all MOBO cables multiple times
Reinserted the cpu and cpu fan
I’ve tried powering it on without the GPU
I’ve tried a Corsair 750W psu
I’ve tried running the PC outside of the case Incase of any shortages
I do notice that there is an optional additional 4pin power plug next to the CPU 8pin power (which I’m currently plugged into, as well as the main motherboard plug (30 pins or something), but the manual says this is optional, and I would’ve thought I’d get something a little more than what I’m currently receiving!
If anyone has any ideas of things I could try please let me know! I’ve been working on this for like 10 hours now and really just wanna sit down and watch the Mandalorian!
Thanks in advance,
Ben
I built my new PC today with the following specs:
Corsair 200r case
I5 10600kf cpu
Asus prime Z490-P motherboard
Gtx 1060 6gb gpu
Corsair VS650 (650W PSU)
WD BLUE M.2 drive
Corsair vengeance lpx 32gb 3000mhz RAM
After building it and turning it on initially I noticed that it seemed very quiet and there was no image on my monitor. After further inspection I noticed that the cpu fan isn’t running at all, and that the other fans seem to be running very sluggishly. Ive looked at it over and over ensuring everything is connected correctly and by this point I feel like I’m going crazy! I’ve tried all of the below:
Reinserting the RAM
Changing RAM slots
Trying one stick of RAM instead of two
Reinserting all MOBO cables multiple times
Reinserted the cpu and cpu fan
I’ve tried powering it on without the GPU
I’ve tried a Corsair 750W psu
I’ve tried running the PC outside of the case Incase of any shortages
I do notice that there is an optional additional 4pin power plug next to the CPU 8pin power (which I’m currently plugged into, as well as the main motherboard plug (30 pins or something), but the manual says this is optional, and I would’ve thought I’d get something a little more than what I’m currently receiving!
If anyone has any ideas of things I could try please let me know! I’ve been working on this for like 10 hours now and really just wanna sit down and watch the Mandalorian!
Thanks in advance,
Ben
Comment