First Customer Build and won't start

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MakerV6
    PCHF Member
    • Oct 2019
    • 11

    #16
    MSI GTX 960 2G D5
    No, it’s used from another build.

    Comment

    • phillpower2
      PCHF Administrator
      • Sep 2016
      • 15205

      #17
      Are you sure that the card works and have you connected the 6 pin PCI-E power dongle from the PSU to the card.

      Do you have a keyboard connected to the MB.

      What does the MB user manual say about the debug LED.

      Comment

      • MakerV6
        PCHF Member
        • Oct 2019
        • 11

        #18
        All the manual says about debug LEDs is that the component in question is failing or faulty.

        Funny update, turns out the hdmi cable I was using was bad. I switched to a newer one I had and I was able to finally boot to the bios. Then after fully reassembling the rig I also discovered that I had a bad memory stick.

        Comment

        • phillpower2
          PCHF Administrator
          • Sep 2016
          • 15205

          #19
          Normally red when there is a problem and green when all is well.

          Shame about the bad stick of RAM but good that you found both problems, well done and thank you for letting us know (y)

          Is there anything else you need help with or should we mark your thread as being solved.

          Comment

          • MakerV6
            PCHF Member
            • Oct 2019
            • 11

            #20
            Everything is working just as it should (besides the dead ram stick and hdmi cord). So we can mark this as solved

            Comment

            • phillpower2
              PCHF Administrator
              • Sep 2016
              • 15205

              #21
              Great stuff, thanks for the follow up MakerV6 (y)

              Comment

              Working...