An unexpected error has occurred 0xc000000f windows 10

[PeterOz]

My guess faulty drive. Because you can see data does not mean the drive is good.
You have not let chkdsk unmount the drive - any reason?

[MIB]

how are you connecting them and where are did They come from?

In the same sata cable , the hdd is the original has 1tb and the problematic hdd has 2 tb and is a clone .

My guess faulty drive. Because you can see data does not mean the drive is good.
You have not let chkdsk unmount the drive - any reason?

“You have not let chkdsk unmount the drive - any reason?”

I don’t know what chkdsk does after this command, so I didn’t do it as a precaution.
Hi, I just did chkdsk /f , do you think I should do chkdsk /r ? This drive is 2 years old .
It is safe unmount the drive?

Thanks Peter

[PeterOz]

do you think I should do chkdsk /r ?

Do r it contains f
Y to umount

This drive is 2 years old

I have had drives 6 months old fail.
Both quality drives.

[Rustys]

Any new information

[MIB]

Any new information

Hi, Can you tell me if the system reserved partition with status “not heathy” could be part of the problem?
Thanks

https://pchelpforum.net/attachments/diskpart-system-reserved-partition-not-healthy-jpg.12072/

[MIB]

Do r it contains f
Y to umount

I have had drives 6 months old fail.
Both quality drives.

Hi, Can you tell me if the system reserved partition with status “not heathy” could be part of the problem?
Thanks

Do r it contains f
Y to umount

I have had drives 6 months old fail.
Both quality drives.

Hi, Can you tell me if the system reserved partition with status “not heathy” could be part of the problem?
Thanks

https://pchelpforum.net/attachments/diskpart-system-reserved-partition-not-healthy-jpg.12072/

[MIB]

You can either return the original drive & open Macrium & choose to create their boot media or download Macrium to another pc & create their media. Then you would swap back to the cloned drive & insert the Macrium boot usb & rapidly pressing the key which corresponds to the temporary boot order - this is usually F7 or F8 the pc manufacturer’s manual for the pc will have the information. Once inside the Macrium recovery environment you choose Other then repair boot menu.
You should already have this media created in case of problems.

It will delete then recreate the boot files.

Hi, Can you tell me if the system reserved partition with status “not heathy” could be part of the problem?
Thanks

https://pchelpforum.net/attachments/diskpart-system-reserved-partition-not-healthy-jpg.12072/

[PeterOz]

Hi, Can you tell me if the system reserved partition with status “not heathy” could be part of the problem?
Thanks

It mostly would be the issue

[PeterOz]

system reserved partition is what makes the computer boot.
This next step could be risky and I have not personally tried this method.
You have another disk that can boot this computer so the system reserved partition must be good.
You could try and put the good disk that boots into the computer as the main disk.
have the non-working disk as a slave disk.
Copy the good system reserve to the faulty system reserve and overwrite the data.

AS NOTED ABOVE I HAVE NOT PERSONALLY TRIED THIS.
Have a look at this also 5 Ways to Fix the System Reserved Partition Not on SSD Issue

[Bruce]

@MIB - any news?

[MIB]

Hi, I Have made some progress ,and tomorrow I´ll post here , but I still need help!!!
Thanks Bruce

[MIB]

Still say that they image is corrupt and a fresh install maybe the best route.

Yes , I also think that could be one of the problems , or something in the EFI system partition or even the system reserved partition, I really dont know ,like I have said before , (I dont understand almost nothing about working with Command lines I am a zero in CMD really
. But I try to follow instructions , with caution.
I was unable to apparently repair the WinRE in recovery partition following some parts of this youtube video , and now I can enter in WinRE without usb bootable. But safe mode do still not working even with Usb in cmd.
The DART tools in WinRE are working apparently without problems. but I never use it.
Do you know any way to repair or recreate The Image without affect apps and data?
Please help me if you can .
Thank you for all…

Please see the WinRE link r , It works .

[MEDIA=youtube]94QInTcTWt4:1[/MEDIA]

[MIB]

system reserved partition is what makes the computer boot.
This next step could be risky and I have not personally tried this method.
You have another disk that can boot this computer so the system reserved partition must be good.
You could try and put the good disk that boots into the computer as the main disk.
have the non-working disk as a slave disk.
Copy the good system reserve to the faulty system reserve and overwrite the data.

AS NOTED ABOVE I HAVE NOT PERSONALLY TRIED THIS.
Have a look at this also 5 Ways to Fix the System Reserved Partition Not on SSD Issue

Still say that they image is corrupt and a fresh install maybe the best route.

Yes , I also think that could be one of the problems , or something in the EFI system partition or even the system reserved partition, I really dont know ,like I have said before , (I dont understand almost nothing about working with Command lines I am a zero in CMD really
. But I try to follow instructions , with caution.
I was unable to apparently repair the WinRE in recovery partition following some parts of this youtube video , and now I can enter in WinRE without usb bootable. But safe mode do still not working even with Usb in cmd.
The DART tools in WinRE are working apparently without problems. but I never use it.
Do you know any way to repair or recreate The Image without affect apps and data?
Please help me if you can .
Thank you for all…

Please see the WinRE link r , It works .

[MEDIA=youtube]94QInTcTWt4:1[/MEDIA]

Hi, I Have made some progress ,and tomorrow I´ll post here , but I still need help!!!
Thanks Bruce

[Rustys]

Still say need to do a fresh install and until that is done you will continue to have these issues and we will be running in an endless loop getting nowhere.

Please see the WinRE link r , It works .

[MEDIA=youtube]94QInTcTWt4[/MEDIA]

Did this fix your issue?

[MIB]

Still say need to do a fresh install and until that is done you will continue to have these issues and we will be running in an endless loop getting nowhere.

Did this fix your issue?

Fix the WinRE , in the recovery partition, but I cannot enter in safeboot in cmd usb ,or Winre.