An unexpected error has occurred 0xc000000f windows 10

[MIB]

An unexpected error has occurred 0xc000000f windows 10,
No boot or safe mode even in cmd .
I try bootrec /rebuildbcd , and give me , total identified Windows installations 0 .
Is a EFI partition.
I really don´t want to reset the PC.
Can someone could help me in this problem ?
Thanks for everything

[veeg]

Hello

Do you have a bootable usb drive with win 10 on it ? If so you can try that and look for the option to repair.

[MIB]

Hi, thanks for replying,
Yes I have, I’ve tried the automatic repair several times, but it didn’t work.
I think WINRE has some problem.
I already tried rebuilding the EFI system partition and it didn’t work either.
Bootrec /fixboot access denied, and
attrib c:\boot\bcd -h -r -s shows " file not found" in c:\boot\bcd
I already did chkdsk , and the disk has no bad sectors.
The problem happened when the graphics card gave 4 beeps and the pc shut down 3 or 4 times, and when I restarted the pc it stayed in the blue screen loop.
I think it’s not a hardware or Asus bios problem, because this hdd is a macrium clone, and the original hdd, works without problem.
Can you help me with this problem please?
Thank you for everything

[veeg]

See if this helps..

[MEDIA=youtube]01O0eogu-m4[/MEDIA]

[PeterOz]

because this hdd is a macrium clone, and the original hdd, works without problem.

Re-clone

[MIB]

Re-clone

Yes; I did a backup, but really need help!
do you know how to solve these errors?
Can you try to help me please?
If you want I can put the srrtrail logs, or other screenshots for you to see better.
I really wanted to recover this system, this clone hdd was made 2 years ago and has more apps and settings.etc… than the original hdd.
Thanks

[PeterOz]

If bcd did not work.
Boot with windows tool.
at the install screen press shift and f10
at the cmd prompt try system restore
Type rstrui.exe press enter
Pick a restore point from before the issue.
You may have to check search for more restore points

[PeterOz]

if no good see if Aomei free can help
https://www.diskpart.com/articles/your-pc-needs-to-be-repaired-0xc000000f-7201.html#:~:text=If%20the%20issue%20"Your%20PC%20 needs%20to%20be,command%3A%20"%20bootrec%20%2Frebu ildbcd%20"%20and%20press%20Enter.

[MIB]

if no good see if Aomei free can help
https://www.diskpart.com/articles/your-pc-needs-to-be-repaired-0xc000000f-7201.html#:~:text=If%20the%20issue%20"Your%20PC%20 needs%20to%20be,command%3A%20"%20bootrec%20%2Frebu ildbcd%20"%20and%20press%20Enter.

If bcd did not work.
Boot with windows tool.
at the install screen press shift and f10
at the cmd prompt try system restore
Type rstrui.exe press enter
Pick a restore point from before the issue.
You may have to check search for more restore points

This hdd don´t have restore points.
I think Aomei only try to repair the Mbr .I’ll try Aomei usb, but I don’t think it will work.
And I think the problem is more complicated, but may be have solution, I hope .
I don’t understand almost anything about inserting commands in cmd.
And rule 2.1, can also be " If ain´t broke , don´t fix it"
And I try to follow these rules…

Thanks PeterOz

[Rustys]

Have you attempted a repair install using the install media?

Where and how was the install media crated and come from?

[MIB]

Have you attempted a repair install using the install media?

Where and how was the install media crated and come from?

Hello,
Yes, it’s on a usb pen drive.
It was a person who sold me the pc that made it,
I don’t know how it was created, but it’s the version of windows 10, 19041.
This pc (hdd drive) has never been connected to the internet, I don’t need updates, this pc is only for use with Vst’s plug-ins and other music software.
Thank you for everything

[PeterOz]

did you watch the video on bcd.
I know you have tried bcd BUT there is more than oneway to repair bcd.
It might give you a different method.

[MIB]

did you watch the video on bcd.
I know you have tried bcd BUT there is more than oneway to repair bcd.
It might give you a different method.

Yes, I believe, but I’m not finding it, and that’s what I came to look for in your forum (site).
If you want, I can put any screenshot of the cmd errors, and srttrail logs, etc… it might help.
Thanks

[Rustys]

I would suggest that you create a new Windows install disk the one that you have is to old and may not be working properly.

That version was released 5/27/2020 and stopped being maintained 12/14/2021.

Suggest you create a new one using the Media Creation Tool through the windows site.

Use the Download link under
Create Windows 10 installation media

https://www.microsoft.com/en-us/soft...load/windows10

because this hdd is a macrium clone, and the original hdd,

Which is why when you get a new drive always preform a fresh clean install of the OS.

I really wanted to recover this system, this clone hdd was made 2 years ago and has more apps and settings.etc… than the original hdd.

Especially when the clone is this age.

Your best bet is to create a new Windows 10 install media and preform a clean install of the operating system the drivers in the proper order starting with the chipsets.

[PeterOz]

Do you have anything besides the leyboard and mouse plugged.
Any usb drives.
Any cd/dvd in the dvd player?