An unexpected error has occurred 0xc000000f windows 10

[PeterOz]

In your screenshot above.
F8 Startup settings.
Will this give you safe mode to boot?

[PeterOz]

Besides the programs do you have any data you need off the drive?

[MIB]

In your screenshot above.
F8 Startup settings.
Will this give you safe mode to boot?

Hi ,
No, and I can’t do it in cmd either,
“bcdedit /set {default] safeboot minimal" does not work.
thanks

[MIB]

Besides the programs do you have any data you need off the drive?

Hi,
I made a backup, but I wanted to try to recover the system, because I have many versions of vst plugins that are 32 and 64 bit and that took a long time to configure, etc…
Thank you for everything

[MIB]

Do you have anything besides the leyboard and mouse plugged.
Any usb drives.
Any cd/dvd in the dvd player?

No ,
this pc works well with other hdd’s,
I think it shouldn’t be a hardware problem.
I already connected two different hdd’s and they worked without problems.
Perhaps some issue related to UEFI. partition ???
Thanks

[MIB]

I would suggest that you create a new Windows install disk the one that you have is to old and may not be working properly.

That version was released 5/27/2020 and stopped being maintained 12/14/2021.

Suggest you create a new one using the Media Creation Tool through the windows site.

Use the Download link under
Create Windows 10 installation media

https://www.microsoft.com/en-us/soft...load/windows10

Which is why when you get a new drive always preform a fresh clean install of the OS.

Especially when the clone is this age.

Your best bet is to create a new Windows 10 install media and preform a clean install of the operating system the drivers in the proper order starting with the chipsets.

HI, I’ll try to recover the system, if I can’t , I do a clean install.
But I think this problem has solution.
I’ll post some screenshots in the next few days, to see if anyone knows of a solution, or perhaps the same error.

Thank you for everything

[PeterOz]

At the cmd prompt
Type Diskpart press enter
Type list disk press enter
What do you see

[PeterOz]

@Bastet any ideas?

[Bastet]

As the installation is a Macrium clone have you tried booting from their recovery media & choosing repair boot?

[MIB]

As the installation is a Macrium clone have you tried booting from their recovery media & choosing repair boot?

Hi Bastet ,can you tell me please, how Macrium rescue media , do the repair process?
Thanks

[Bastet]

You can either return the original drive & open Macrium & choose to create their boot media or download Macrium to another pc & create their media. Then you would swap back to the cloned drive & insert the Macrium boot usb & rapidly pressing the key which corresponds to the temporary boot order - this is usually F7 or F8 the pc manufacturer’s manual for the pc will have the information. Once inside the Macrium recovery environment you choose Other then repair boot menu.
You should already have this media created in case of problems.

It will delete then recreate the boot files.

[MIB]

You can either return the original drive & open Macrium & choose to create their boot media or download Macrium to another pc & create their media. Then you would swap back to the cloned drive & insert the Macrium boot usb & rapidly pressing the key which corresponds to the temporary boot order - this is usually F7 or F8 the pc manufacturer’s manual for the pc will have the information. Once inside the Macrium recovery environment you choose Other then repair boot menu.
You should already have this media created in case of problems.

It will delete then recreate the boot files.

Hi ,
Macrium rescue usb did not solve the problem unfortunately.
When I run SFC /cannow , I get this error , does anyone know how to try to resolve this ?

"windows resource protection could not perform the requested operation "

Thank you all

[PeterOz]

Try dism

https://www.ubackup.com/windows-10/dism-offline-repair-windows-10.html#:~:text=1%20DISM%20%2FOnline%20%2FCleanup-Image%20%2FStartComponentCleanup%202%20DISM%20%2FOnline,DISM%20%2FOnline%20%2FCleanup-Image%20%2FRestoreHealth%20%2Fsource%3AF%3ASourcesInstall.wim%3A1%20%2FLimitAccess%20More%20

[Rustys]

Have you created the new windows install medial like you were instructed to in Post # 14?

I’ll post some screenshots in the next few days, to see if anyone knows of a solution, or perhaps the same error.

Might be helpful.

Still say that they image is corrupt and a fresh install maybe the best route.

this pc works well with other hdd’s,
I think it shouldn’t be a hardware problem.
I already connected two different hdd’s and they worked without problems.

how are you connecting them and where are did They come from?

Macrium rescue usb did not solve the problem unfortunately.
When I run SFC /cannow , I get this error , does anyone know how to try to resolve this ?

"windows resource protection could not perform the requested operation "

Could be due to corruption or you are not running under an Administrator Command Prompt

[MIB]

Hello, here are some pictures of the errors, maybe you can better understand the cause or causes of this problem. I hope you can help me, I really wanted to try to recover the system.
Thank you all

how are you connecting them and where are did They come from?

In the same sata cable , the hdd is the original has 1tb and the problematic hdd has 2 tb and is a clone .