any help would be great

[allan_hogg]

ok thank you for that ive removed avast secure browser now and tried your tool twice it says its doing stuff but speccy still stays same
i appreciate your time and help btw
so with ram do i just remove one and put in other then use and see if i get BSOD again or do i run memtest again

[allan_hogg]

and also do u think its worth me restarting my windows 10 as in just getting new copy

[Rustys]

so with ram do i just remove one and put in other then use and see if i get BSOD again or do

Yes in each one of the slots.

and also do u think its worth me restarting my windows 10 as in just getting new copy

that is up to you there could be corruption with in windows that may be causing this.

[allan_hogg]

hi sorry ive not replied ive just reinstalled windows 10 from scratch also ordered a solid state drive and new ram so heres hoping m8
thank you very much for help should i still check speccy to see if avast there or will it not

[Rustys]

Since you did a reinstall of windows you will need to install the chipset and drivers.

No Avast should not be there any more unless you install it or the browser.

Is the system still crashing?
Did you test the RAM like suggested? What were the results?

[allan_hogg]

Hi I’ve just been trying to let my son play a little while and see results I will try today a for hours and definately reply and let you know results it hasn’t had BSOD yet anyway

[allan_hogg]

hi just to let you know it worked this morning all morning ran fine then we left on and i come back threw later and its on but no signal on screen now it turns on and keyboard lights when pressed but goes straight off after also seen that hardrive monitor light on box isnt flashing at all and when it was pc was starting up
dont know where to go from here sorry

[allan_hogg]

ive tried removing RAM And swapping etc but to no avail i personally think and have thought hardrive is away as that light doesnt flash like my other pc
to show hardrive working and ive noticed when pc was working it was

[Rustys]

Did you ever test the RAM like was suggested?

Follow the instructions it may take a while if the HDD is larger give it time to complete.

https://pchelpforum.net/r/run-chkdsk-using-command-prompt.20/

To post the results follow these instructions

Here is one way that you can pull the log to view it. You can also COPY and PASTE the contents from the CHKDSKResults.txt file into a post.

1. Press the Windows + R keys to open the Run dialog, type powershell.exe, and press Enter.
2. In PowerShell, copy and paste the command below, and press Enter.

get-winevent -FilterHashTable @{logname=“Application”; id=“1001”}| ?{$_.providername –match “wininit”} | fl timecreated, message | out-file Desktop\CHKDSKResults.txt

3. CHKDSKResults.txt file will be created on your desktop, that is the log file of your chkdsk scan results from Event Viewer.

[allan_hogg]

hi thabks for replying going to run CHKDSK right now i managed to get this pc to start up again i could only test RAM yesterday By seeing if they made difference to pc startup in which they didnt it seems that if i take power plug from it then put back in it resets and starts again

[allan_hogg]

It’s running CHKDSK right now says fixing fixing files c: which I hope is what meant to say I have previously done this with 0 problems found think this will take a while

[Malnutrition]

Curious if something else is going on here…

Please download the FRST 32 bit or FRST 64bit version to suit your operating system. It is important FRST is downloaded to your desktop.

If you are unsure if your operating system is 32 or 64 Bit please go HERE.
Once downloaded right click the FRST desktop icon and select “Run as administrator” from the menu"
[IMG alt=“icon2.jpg”]https://pchelpforum.net/attachments/icon2-jpg.794/
If you receive any security warnings, or the User Account Control warning opens at any time whilst using FRST you can safely allow FRST to proceed.
FRST will open with two dialogue boxes, accept the disclaimer.
[IMG alt=“frst disclaimer.jpg”]https://pchelpforum.net/attachments/...aimer-jpg.795/
[ol]
[li]Accept the default whitelist options,[/li][li]If the additions.txt options box is not checked please select it.[/li][li]Then select Scan[/li][/ol]
[IMG alt=“frst.jpg”]https://pchelpforum.net/attachments/frst-jpg.796/
Frst will take a few minutes to scan your computer, and when finished will produce two log files on your desktop, FRST.txt, and Addition.txt. They will display immediately on the desktop, but can be reopened later as a notepad file.
[IMG alt=“2016-08-12_152002.jpg”]https://pchelpforum.net/attachments/...52002-jpg.797/
Please Copy and Paste the contents of these logs in your next post for review by our Security Team[/IMG]

[allan_hogg]

it says this when doing that thing threw powershell
et-winevent : The term ‘et-winevent’ is not recognized as the name of a cmdlet, function, script file, or operable
program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1

• et-winevent -FilterHashTable @{logname=“Application”; id=“1001”}| ?{$ …

•   + CategoryInfo          : ObjectNotFound: (et-winevent:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

[allan_hogg]

hi done the FRST thing ran it il attach files

[Rustys]

Lets try the link here and see if this work to get the information.

https://www.tenforums.com/tutorials/40822-read-chkdsk-log-event-viewer-windows-10-a.html

Once you get to step 4 and can see the one that you ran on the side select copy
Then in the text box here left click and select paste.

If the same information does not paste in then open note pad and pasted into there.
Save the file and attach it using the Attach files button on the lower left of that text box.

i could only test RAM yesterday By seeing if they made difference to pc startup in which they didnt it seems that if i take power plug from it then put back in it resets and starts again

Please explain this in more detail.

I previously installed power supply unit a evga bronze

What is the make and model. The one that you replaced it with many not be powerful enough to run everything.

Plus everything shows that the RAM is bad and needs be replaced or the ports that the RAM insert int the Motherboard are bad and the Motherboard needs replaced.