No display issues

[phillpower2]

Strange as I get different specs ECS NM70-M

yes my gpu does have power dongles from the psu, I have unplugged these to ensure no dust is inside.

Sorry but got to ask, you have reconnected them!

Is there anyone that you could ask if you could borrow their PSU to test in your system, the PSU needs to be a good brand 500W with at least 33 amps on the +12V rail.

Corsair make great PSUs but they didnt get it quite right with the CX600 and it has a high failure rate

[Jayrich872001]

Yeah they are reconnected, I’m gonna grab a dvi or serial lead and connect the onboard gpu. Get it running and then troubleshoot afterwards. At least I can access it then. I’m going to switch over to Linux I think.

[phillpower2]

Be sure to remove the add on GPU from the MB before you hook up the DVI, the add on GPU may not be functional but the BIOS will detect it and disable the onboard graphics solution.

[Rustys]

I would suggest that once you get the system where you can access it get you person document, pictures, and data backed up.

Have you ever used Linux before? There is a learning curve with it.

@phillpower2 thanks…

[phillpower2]

Any update for us Jayrich872001?

You are welcome Russ

[phillpower2]

Any update for us? This thread will be closed if not replied to within 48hrs.