Stopping the Win10 download nagging

[phillpower2]

Yes as you have two issues going on, overheating and driver conflicts, when not under any load the computer will run for longer but as soon as anything that requires graphics intensive use the computer gets hotter + the drivers conflict.

Below is some info from your crash on Thursday, drivers I have highlighted in green are good, drivers in red are bad, the Nvidea drivers need to be gotten rid of and the
EhStorClass drivers updated, I would also make sure that Hibernation was disabled, known to cause problems and more trouble than it is worth;

Open the Win+X menu, and click/tap on Command Prompt (Admin)
In the elevated command prompt type powercfg -h off press Enter and you are done.

The cause
MODULE_NAME: dxgmms2

Drivers that loaded successfully;
start end module name
ffffbce6[ICODE]83c00000 ffffbce6[/ICODE]83f87000 win32kfull win32kfull.sys
ffffbce6[ICODE]83f90000 ffffbce6[/ICODE]84110000 win32kbase win32kbase.sys
ffffbce6[ICODE]84120000 ffffbce6[/ICODE]8412a000 TSDDD TSDDD.dll
ffffbce6[ICODE]84130000 ffffbce6[/ICODE]84191000 ATMFD ATMFD.DLL
ffffbce6[ICODE]84200000 ffffbce6[/ICODE]84240000 cdd cdd.dll
ffffbce6[ICODE]84ac0000 ffffbce6[/ICODE]84afb000 win32k win32k.sys
fffff800[ICODE]73a38000 fffff800[/ICODE]73a43000 kd kd.dll
fffff800[ICODE]74e1a000 fffff800[/ICODE]74e8f000 hal hal.dll
fffff800[ICODE]74e8f000 fffff800[/ICODE]756a7000 nt ntoskrnl.exe
fffff803[ICODE]e0200000 fffff803[/ICODE]e0225000 tm tm.sys
fffff803[ICODE]e0230000 fffff803[/ICODE]e0247000 PSHED PSHED.dll
fffff803[ICODE]e0250000 fffff803[/ICODE]e025c000 BOOTVID BOOTVID.dll
fffff803[ICODE]e0260000 fffff803[/ICODE]e02c2000 FLTMGR FLTMGR.SYS
fffff803[ICODE]e02d0000 fffff803[/ICODE]e032d000 msrpc msrpc.sys
fffff803[ICODE]e0330000 fffff803[/ICODE]e0358000 ksecdd ksecdd.sys
fffff803[ICODE]e0360000 fffff803[/ICODE]e0410000 clipsp clipsp.sys
fffff803[ICODE]e0410000 fffff803[/ICODE]e041d000 cmimcext cmimcext.sys
fffff803[ICODE]e0420000 fffff803[/ICODE]e042c000 ntosext ntosext.sys
fffff803[ICODE]e0430000 fffff803[/ICODE]e04d0000 CI CI.dll
fffff803[ICODE]e04d0000 fffff803[/ICODE]e056e000 cng cng.sys
fffff803[ICODE]e0570000 fffff803[/ICODE]e0644000 Wdf01000 Wdf01000.sys
fffff803[ICODE]e0650000 fffff803[/ICODE]e0663000 WDFLDR WDFLDR.SYS
fffff803[ICODE]e0670000 fffff803[/ICODE]e0693000 acpiex acpiex.sys
fffff803[ICODE]e06a0000 fffff803[/ICODE]e06ae000 WppRecorder WppRecorder.sys
fffff803[ICODE]e06b0000 fffff803[/ICODE]e0763000 ACPI ACPI.sys
fffff803[ICODE]e0770000 fffff803[/ICODE]e077c000 WMILIB WMILIB.SYS
fffff803[ICODE]e0780000 fffff803[/ICODE]e078c000 klim6 klim6.sys
fffff803[ICODE]e0790000 fffff803[/ICODE]e07a1000 intelpep intelpep.sys
fffff803[ICODE]e07b0000 fffff803[/ICODE]e07cf000 WindowsTrustedRT WindowsTrustedRT.sys
fffff803[ICODE]e07d0000 fffff803[/ICODE]e07db000 WindowsTrustedRTProxy WindowsTrustedRTProxy.sys
fffff803[ICODE]e07e0000 fffff803[/ICODE]e07f2000 pcw pcw.sys
fffff803[ICODE]e0800000 fffff803[/ICODE]e0837000 klupd_klif_arkmon klupd_klif_arkmon.sys
fffff803[ICODE]e0840000 fffff803[/ICODE]e084b000 msisadrv msisadrv.sys
fffff803[ICODE]e0850000 fffff803[/ICODE]e08a7000 pci pci.sys
fffff803[ICODE]e08b0000 fffff803[/ICODE]e08c2000 vdrvroot vdrvroot.sys
fffff803[ICODE]e08d0000 fffff803[/ICODE]e08f1000 pdc pdc.sys
fffff803[ICODE]e0900000 fffff803[/ICODE]e0919000 CEA CEA.sys
fffff803[ICODE]e0920000 fffff803[/ICODE]e0944000 partmgr partmgr.sys
fffff803[ICODE]e0950000 fffff803[/ICODE]e0b6f000 dxgkrnl dxgkrnl.sys
fffff803[ICODE]e0b70000 fffff803[/ICODE]e0b82000 BasicRender BasicRender.sys
fffff803[ICODE]e0b90000 fffff803[/ICODE]e0ba9000 Npfs Npfs.SYS
fffff803[ICODE]e0bb0000 fffff803[/ICODE]e0bd3000 tdx tdx.sys
fffff803[ICODE]e0be0000 fffff803[/ICODE]e0c2b000 netbt netbt.sys
fffff803[ICODE]e0c30000 fffff803[/ICODE]e0c43000 klwfp klwfp.sys
fffff803[ICODE]e0c50000 fffff803[/ICODE]e0ce5000 afd afd.sys
fffff803[ICODE]e0cf0000 fffff803[/ICODE]e0d7e000 mcupdate_GenuineIntel mcupdate_GenuineIntel.dll
fffff803[ICODE]e0d80000 fffff803[/ICODE]e0d90000 werkernel werkernel.sys
fffff803[ICODE]e0d90000 fffff803[/ICODE]e0df3000 CLFS CLFS.SYS
fffff803[ICODE]e0e00000 fffff803[/ICODE]e0e5e000 volmgrx volmgrx.sys
fffff803[ICODE]e0e60000 fffff803[/ICODE]e0e7e000 mountmgr mountmgr.sys
fffff803[ICODE]e0e80000 fffff803[/ICODE]e0e8e000 klbackupdisk klbackupdisk.sys
fffff803[ICODE]e0e90000 fffff803[/ICODE]e0e9c000 atapi atapi.sys
fffff803[ICODE]e0ea0000 fffff803[/ICODE]e0ed5000 ataport ataport.SYS
fffff803[ICODE]e0f00000 fffff803[/ICODE]e0f19000 fileinfo fileinfo.sys
fffff803[ICODE]e0f20000 fffff803[/ICODE]e0f58000 Wof Wof.sys
fffff803[ICODE]e0f60000 fffff803[/ICODE]e1192000 NTFS NTFS.sys
fffff803[ICODE]e11a0000 fffff803[/ICODE]e11ad000 Fs_Rec Fs_Rec.sys
fffff803[ICODE]e11b0000 fffff803[/ICODE]e12d8000 ndis ndis.sys
fffff803[ICODE]e12e0000 fffff803[/ICODE]e1359000 NETIO NETIO.SYS
fffff803[ICODE]e1360000 fffff803[/ICODE]e1390000 ksecpkg ksecpkg.sys
fffff803[ICODE]e1390000 fffff803[/ICODE]e1608000 tcpip tcpip.sys
fffff803[ICODE]e1610000 fffff803[/ICODE]e1679000 fwpkclnt fwpkclnt.sys
fffff803[ICODE]e1680000 fffff803[/ICODE]e16aa000 wfplwfs wfplwfs.sys
fffff803[ICODE]e16b0000 fffff803[/ICODE]e1753000 fvevol fvevol.sys
fffff803[ICODE]e1760000 fffff803[/ICODE]e176b000 volume volume.sys
fffff803[ICODE]e1770000 fffff803[/ICODE]e17d4000 volsnap volsnap.sys
fffff803[ICODE]e17e0000 fffff803[/ICODE]e1828000 rdyboost rdyboost.sys
fffff803[ICODE]e1830000 fffff803[/ICODE]e1855000 mup mup.sys
fffff803[ICODE]e1860000 fffff803[/ICODE]e187c000 klupd_klif_klbg klupd_klif_klbg.sys
fffff803[ICODE]e1880000 fffff803[/ICODE]e1890000 iorate iorate.sys
fffff803[ICODE]e1890000 fffff803[/ICODE]e18a0000 Msfs Msfs.SYS
fffff803[ICODE]e18a0000 fffff803[/ICODE]e18b0000 EUBKMON EUBKMON.sys
fffff803[ICODE]e18b0000 fffff803[/ICODE]e18c3000 eubakup eubakup.sys
fffff803[ICODE]e18d0000 fffff803[/ICODE]e18ee000 disk disk.sys
fffff803[ICODE]e18f0000 fffff803[/ICODE]e1952000 CLASSPNP CLASSPNP.SYS
fffff803[ICODE]e1980000 fffff803[/ICODE]e1999000 crashdmp crashdmp.sys
fffff803[ICODE]e1a20000 fffff803[/ICODE]e1a68000 dtsoftbus01 dtsoftbus01.sys
fffff803[ICODE]e1a70000 fffff803[/ICODE]e1b0b000 klhk klhk.sys
fffff803[ICODE]e1b10000 fffff803[/ICODE]e1b41000 cdrom cdrom.sys
fffff803[ICODE]e1b50000 fffff803[/ICODE]e1b64000 klbackupflt klbackupflt.sys
fffff803[ICODE]e1b70000 fffff803[/ICODE]e1bad000 klflt klflt.sys
fffff803[ICODE]e1bb0000 fffff803[/ICODE]e1bcd000 filecrypt filecrypt.sys
fffff803[ICODE]e1bd0000 fffff803[/ICODE]e1bde000 tbs tbs.sys
fffff803[ICODE]e1be0000 fffff803[/ICODE]e1bea000 klpd klpd.sys
fffff803[ICODE]e1bf0000 fffff803[/ICODE]e1cee000 klif klif.sys
fffff803[ICODE]e1cf0000 fffff803[/ICODE]e1d58000 ks ks.sys
fffff803[ICODE]e1d60000 fffff803[/ICODE]e1d6a000 Null Null.SYS
fffff803[ICODE]e1d70000 fffff803[/ICODE]e1d7a000 Beep Beep.SYS
fffff803[ICODE]e1d80000 fffff803[/ICODE]e1d94000 BasicDisplay BasicDisplay.sys
fffff803[ICODE]e1da0000 fffff803[/ICODE]e1db0000 TDI TDI.SYS
fffff803[ICODE]e1db0000 fffff803[/ICODE]e24b9000 kl1 kl1.sys
fffff803[ICODE]e24c0000 fffff803[/ICODE]e24f9000 cm_km cm_km.sys
fffff803[ICODE]e2500000 fffff803[/ICODE]e250a000 pciide pciide.sys
fffff803[ICODE]e2510000 fffff803[/ICODE]e2521000 PCIIDEX PCIIDEX.SYS
fffff803[ICODE]e2530000 fffff803[/ICODE]e25bd000 spaceport spaceport.sys
fffff803[ICODE]e25c0000 fffff803[/ICODE]e25d8000 volmgr volmgr.sys
fffff803[ICODE]e25e0000 fffff803[/ICODE]e25f4000 watchdog watchdog.sys
fffff803[ICODE]e2800000 fffff803[/ICODE]e280a000 SASKUTIL64 SASKUTIL64.SYS
fffff803[ICODE]e2810000 fffff803[/ICODE]e281a000 SASDIFSV64 SASDIFSV64.SYS
fffff803[ICODE]e2820000 fffff803[/ICODE]e2831000 nsiproxy nsiproxy.sys
fffff803[ICODE]e2840000 fffff803[/ICODE]e284d000 npsvctrig npsvctrig.sys
fffff803[ICODE]e2850000 fffff803[/ICODE]e2860000 mssmbios mssmbios.sys
fffff803[ICODE]e2860000 fffff803[/ICODE]e288d000 kneps kneps.sys
fffff803[ICODE]e2890000 fffff803[/ICODE]e28bc000 klids klids.sys
fffff803[ICODE]e28c0000 fffff803[/ICODE]e28ca000 gpuenergydrv gpuenergydrv.sys
fffff803[ICODE]e28d0000 fffff803[/ICODE]e2902000 EuFdDisk EuFdDisk.sys
fffff803[ICODE]e2910000 fffff803[/ICODE]e2919000 eudskacs eudskacs.sys
fffff803[ICODE]e2920000 fffff803[/ICODE]e294a000 dfsc dfsc.sys
fffff803[ICODE]e2970000 fffff803[/ICODE]e2976000 AsIO AsIO.sys
fffff803[ICODE]e2980000 fffff803[/ICODE]e29bf000 ahcache ahcache.sys
fffff803[ICODE]e29c0000 fffff803[/ICODE]e29cc000 kltap kltap.sys
fffff803[ICODE]e29d0000 fffff803[/ICODE]e29e1000 CompositeBus CompositeBus.sys
fffff803[ICODE]e29f0000 fffff803[/ICODE]e29fe000 kdnic kdnic.sys
fffff803[ICODE]e2a00000 fffff803[/ICODE]e2a15000 umbus umbus.sys
fffff803[ICODE]e2a20000 fffff803[/ICODE]e2a4b000 intelppm intelppm.sys
fffff803[ICODE]e2a50000 fffff803[/ICODE]e2ab3000 USBXHCI USBXHCI.SYS
fffff803[ICODE]e2ac0000 fffff803[/ICODE]e2af8000 ucx01000 ucx01000.sys
fffff803[ICODE]e2b00000 fffff803[/ICODE]e2c12000 HTTP HTTP.sys
fffff803[ICODE]e2c20000 fffff803[/ICODE]e2ca9000 nwifi nwifi.sys
fffff803[ICODE]e2cb0000 fffff803[/ICODE]e2cf4000 srvnet srvnet.sys
fffff803[ICODE]e2d00000 fffff803[/ICODE]e2db4000 srv2 srv2.sys
fffff803[ICODE]e2dc0000 fffff803[/ICODE]e2e0d000 mrxsmb10 mrxsmb10.sys
fffff803[ICODE]e2e60000 fffff803[/ICODE]e2e79000 vwififlt vwififlt.sys
fffff803[ICODE]e2e80000 fffff803[/ICODE]e2eab000 pacer pacer.sys
fffff803[ICODE]e2eb0000 fffff803[/ICODE]e2ed0000 klwtp klwtp.sys
fffff803[ICODE]e2ed0000 fffff803[/ICODE]e2ee2000 netbios netbios.sys
fffff803[ICODE]e2ef0000 fffff803[/ICODE]e2f65000 rdbss rdbss.sys
fffff803[ICODE]e2f70000 fffff803[/ICODE]e2ffe000 csc csc.sys
fffff803[ICODE]e3c00000 fffff803[/ICODE]e3c10000 usbuhci usbuhci.sys
fffff803[ICODE]e3c10000 fffff803[/ICODE]e3c86000 USBPORT USBPORT.SYS
fffff803[ICODE]e3c90000 fffff803[/ICODE]e3cac000 usbehci usbehci.sys
fffff803[ICODE]e3cb0000 fffff803[/ICODE]e3cfd000 yk63x64 yk63x64.sys
fffff803[ICODE]e3d00000 fffff803[/ICODE]e3d40000 1394ohci 1394ohci.sys
fffff803[ICODE]e3d40000 fffff803[/ICODE]e3d48000 ASACPI ASACPI.sys
fffff803[ICODE]e3d50000 fffff803[/ICODE]e3d5c000 wmiacpi wmiacpi.sys
fffff803[ICODE]e3d60000 fffff803[/ICODE]e3d6d000 NdisVirtualBus NdisVirtualBus.sys
fffff803[ICODE]e3d70000 fffff803[/ICODE]e3d7c000 swenum swenum.sys
fffff803[ICODE]e3d80000 fffff803[/ICODE]e3d8e000 rdpbus rdpbus.sys
fffff803[ICODE]e3d90000 fffff803[/ICODE]e3e10000 usbhub usbhub.sys
fffff803[ICODE]e3e10000 fffff803[/ICODE]e3e1e000 USBD USBD.SYS
fffff803[ICODE]e3e20000 fffff803[/ICODE]e3ea7000 UsbHub3 UsbHub3.sys
fffff803[ICODE]e3ef0000 fffff803[/ICODE]e3efe000 ksthunk ksthunk.sys
fffff803[ICODE]e3f00000 fffff803[/ICODE]e3f6a000 HdAudio HdAudio.sys
fffff803[ICODE]e3f70000 fffff803[/ICODE]e3f94000 USBSTOR USBSTOR.SYS
fffff803[ICODE]e3fa0000 fffff803[/ICODE]e3fd0000 usbccgp usbccgp.sys
fffff803[ICODE]e3fd0000 fffff803[/ICODE]e3fe1000 hidusb hidusb.sys
fffff803[ICODE]e3ff0000 fffff803[/ICODE]e401f000 HIDCLASS HIDCLASS.SYS
fffff803[ICODE]e4020000 fffff803[/ICODE]e4032000 HIDPARSE HIDPARSE.SYS
fffff803[ICODE]e4040000 fffff803[/ICODE]e4057000 LEqdUsb LEqdUsb.Sys
fffff803[ICODE]e4060000 fffff803[/ICODE]e4070000 kbdhid kbdhid.sys
fffff803[ICODE]e4070000 fffff803[/ICODE]e407c000 klkbdflt klkbdflt.sys
fffff803[ICODE]e4080000 fffff803[/ICODE]e4093000 kbdclass kbdclass.sys
fffff803[ICODE]e40a0000 fffff803[/ICODE]e40af000 mouhid mouhid.sys
fffff803[ICODE]e40b0000 fffff803[/ICODE]e40bc000 klmouflt klmouflt.sys
fffff803[ICODE]e40c0000 fffff803[/ICODE]e40d2000 mouclass mouclass.sys
fffff803[ICODE]e40e0000 fffff803[/ICODE]e40f4000 mmcss mmcss.sys
fffff803[ICODE]e4100000 fffff803[/ICODE]e4112000 csrusb csrusb.sys
fffff803[ICODE]e4120000 fffff803[/ICODE]e432c000 CsrBtPort CsrBtPort.sys
fffff803[ICODE]e4330000 fffff803[/ICODE]e438b000 fastfat fastfat.SYS
fffff803[ICODE]e4390000 fffff803[/ICODE]e4437000 dxgmms2 dxgmms2.sys
fffff803[ICODE]e4440000 fffff803[/ICODE]e4494000 udfs udfs.sys
fffff803[ICODE]e44a0000 fffff803[/ICODE]e44ad000 rdpvideominiport rdpvideominiport.sys
fffff803[ICODE]e44b0000 fffff803[/ICODE]e44d0000 wcifs wcifs.sys
fffff803[ICODE]e44d0000 fffff803[/ICODE]e44f6000 luafv luafv.sys
fffff803[ICODE]e4500000 fffff803[/ICODE]e4519000 storqosflt storqosflt.sys
fffff803[ICODE]e4520000 fffff803[/ICODE]e4536000 wcnfs wcnfs.sys
fffff803[ICODE]e4540000 fffff803[/ICODE]e4558000 registry registry.sys
fffff803[ICODE]e4560000 fffff803[/ICODE]e4592000 mqac mqac.sys
fffff803[ICODE]e45a0000 fffff803[/ICODE]e45be000 WudfPf WudfPf.sys
fffff803[ICODE]e45c0000 fffff803[/ICODE]e45e6000 Ndu Ndu.sys
fffff803[ICODE]e4600000 fffff803[/ICODE]e463c000 WUDFRd WUDFRd.sys
fffff803[ICODE]e4640000 fffff803[/ICODE]e464e000 WpdUpFltr WpdUpFltr.sys
fffff803[ICODE]e4650000 fffff803[/ICODE]e4668000 mslldp mslldp.sys
fffff803[ICODE]e4670000 fffff803[/ICODE]e46a1000 rdpdr rdpdr.sys
fffff803[ICODE]e46b0000 fffff803[/ICODE]e46d5000 tsusbhub tsusbhub.sys
fffff803[ICODE]e46e0000 fffff803[/ICODE]e4702000 bowser bowser.sys
fffff803[ICODE]e4710000 fffff803[/ICODE]e4785000 mrxsmb mrxsmb.sys
fffff803[ICODE]e4790000 fffff803[/ICODE]e47cb000 mrxsmb20 mrxsmb20.sys
fffff803[ICODE]e47d0000 fffff803[/ICODE]e47e6000 lltdio lltdio.sys
fffff803[ICODE]e47f0000 fffff803[/ICODE]e480a000 rspndr rspndr.sys
fffff803[ICODE]e4810000 fffff803[/ICODE]e482b000 wanarp wanarp.sys
fffff803[ICODE]e4830000 fffff803[/ICODE]e4846000 ndisuio ndisuio.sys
fffff803[ICODE]e4850000 fffff803[/ICODE]e4869000 mpsdrv mpsdrv.sys
fffff803[ICODE]e4870000 fffff803[/ICODE]e4882000 kldisk kldisk.sys
fffff803[ICODE]e48a0000 fffff803[/ICODE]e4907000 dxgmms1 dxgmms1.sys
fffff803[ICODE]e5340000 fffff803[/ICODE]e535b000 HDAudBus HDAudBus.sys
fffff803[ICODE]e5360000 fffff803[/ICODE]e53c1000 portcls portcls.sys
fffff803[ICODE]e53d0000 fffff803[/ICODE]e53f1000 drmk drmk.sys
fffff803[ICODE]e5400000 fffff803[/ICODE]e542f000 tunnel tunnel.sys
fffff803[ICODE]e5430000 fffff803[/ICODE]e5447000 klupd_klif_kimul klupd_klif_kimul.sys
fffff803[ICODE]e5450000 fffff803[/ICODE]e547a000 klupd_klif_mark klupd_klif_mark.sys
fffff803[ICODE]e5480000 fffff803[/ICODE]e549e000 cdfs cdfs.sys
fffff803[ICODE]e54a0000 fffff803[/ICODE]e54b2000 condrv condrv.sys
fffff803[ICODE]e54c0000 fffff803[/ICODE]e54fd000 klupd_klif_klark klupd_klif_klark.sys
fffff803[ICODE]e5fd0000 fffff803[/ICODE]e6092000 peauth peauth.sys
fffff803[ICODE]e60a0000 fffff803[/ICODE]e612c000 srv srv.sys
fffff803[ICODE]e6130000 fffff803[/ICODE]e6144000 tcpipreg tcpipreg.sys
fffff803[ICODE]e6150000 fffff803[/ICODE]e615a000 speedfan speedfan.sys
fffff803[ICODE]e6170000 fffff803[/ICODE]e617f000 dump_dumpata dump_dumpata.sys
fffff803[ICODE]e6190000 fffff803[/ICODE]e619c000 dump_atapi dump_atapi.sys
fffff803[ICODE]e61c0000 fffff803[/ICODE]e61dd000 dump_dumpfve dump_dumpfve.sys
fffff803[ICODE]e7400000 fffff803[/ICODE]e8236000 nvlddmkm nvlddmkm.sys
fffff803[ICODE]e8240000 fffff803[/ICODE]e8250000 monitor monitor.sys
fffff803[ICODE]e8250000 fffff803[/ICODE]e8285000 nvhda64v nvhda64v.sys
fffff803[ICODE]e82e0000 fffff803[/ICODE]e82ea000 cpuz140_x64 cpuz140_x64.sys

Drivers that failed to load;
fffff803[ICODE]e8300000 fffff803[/ICODE]e830f000 hiber_atapor
fffff803[ICODE]e8310000 fffff803[/ICODE]e831c000 hiber_atapi.
fffff803[ICODE]e8320000 fffff803[/ICODE]e833d000 hiber_dumpfv
fffff803[ICODE]e82f0000 fffff803[/ICODE]e82f8000 43e2f692-d99
fffff803[ICODE]e82d0000 fffff803[/ICODE]e82da000 drmkaud.sys
fffff803[ICODE]e82c0000 fffff803[/ICODE]e82cc000 MSPQM.sys
fffff803[ICODE]e82b0000 fffff803[/ICODE]e82bd000 MSTEE.sys
fffff803[ICODE]e82a0000 fffff803[/ICODE]e82af000 MSKSSRV.sys
fffff803[ICODE]e8290000 fffff803[/ICODE]e829c000 MSPCLOCK.sys
fffff803[ICODE]e5500000 fffff803[/ICODE]e5510000 monitor.sys
fffff803[ICODE]e4930000 fffff803[/ICODE]e533b000 nvlddmkm.sys
fffff803[ICODE]e4910000 fffff803[/ICODE]e4920000 monitor.sys
fffff803[ICODE]e3eb0000 fffff803[/ICODE]e3ee4000 nvhda64v.sys
fffff803[ICODE]e45c0000 fffff803[/ICODE]e45fc000 WUDFRd.sys
fffff803[ICODE]e4560000 fffff803[/ICODE]e459c000 WUDFRd.sys
fffff803[ICODE]e19b0000 fffff803[/ICODE]e19bf000 dump_ataport
fffff803[ICODE]e19d0000 fffff803[/ICODE]e19dc000 dump_atapi.s
fffff803[ICODE]e1a00000 fffff803[/ICODE]e1a1d000 dump_dumpfve
fffff803[ICODE]e40e0000 fffff803[/ICODE]e40fc000 EhStorClass.
fffff803[ICODE]e0ee0000 fffff803[/ICODE]e0efc000 EhStorClass.
fffff803[ICODE]e2950000 fffff803[/ICODE]e2964000 dam.sys
fffff803[ICODE]e0780000 fffff803[/ICODE]e078b000 klelam.sys
fffff803[ICODE]e1890000 fffff803[/ICODE]e189f000 hwpolicy.sys

[Slytod]

About to try steps 1 to 9. Shall try the powercfg after that. Unsure how one gets rid of specific drivers or update EhStorClass ones. I could try to find the files on the drive and simply delete them I suppose. But first things first.

[phillpower2]

Got to head out for the afternoon shortly, will try and check back later but if unable to will be around early am tomorrow.

To check for out of date drivers see below, chipset and storage device drivers are a priority, if unsure please wait and post in your next reply what driver updates if any are suggested;

Run SlimDrivers (free) from here, allow the program to scan your computer to check for any missing or out of date drivers.

Remember to always create a new restore point before updating any drivers.

Please note that I am not suggesting that you use any other product or service that may be offered at the link and be sure to uncheck the SlimCleaner free download box.

[Slytod]

Ok thanks.

High performance already chosen.
Link state power management already off.
Power management mode was optimal power, now set to prefer maximum performance.
There are various ways of starting the game, including the necessity of running origin and starting via that. Checking the shortcuts on bar and desktop: the only disable option I see is for “display scaling” not “desktop composition” There is a compatibility mode option but that is left unticked.
I think I may have covered this ground to some extent when I was getting similar problems in Windows 7.

No updates found Your system has the latest stable drivers and updates installed.
Oh well… should be a good thing really.

[Slytod]

Ok, a short synopsis of what I’ve just tried. Maybe one can help/make suggestions, even though it’s hardware related.

Bit the bullet and removed the heatsink/fan that’s been in use since the PC was made. decided to leave the lead connected for a whle so I knew which plug on the motherboard was the correct one. Scraped off s much thermal rock hard gunk as I could, wiped over the top of the processor with a paper towel dipped in white spirit. Got it as clean as I could. Then put the thermaltake that came with it (probably a bit old now but it seemed to squirt out ok) and put the Frio cooler in place. Wasn’t clear whether the fans should point to the sides or up and down as it fitted in both orientations, so I chose up and down. Screwed up the round “nuts” on the other side as tight as I could.

Then tried to get the old lead off the motherboard and it was a pig of a job. Not only was there minimal room between the Frio and the power supply it also seemed clamped somehow. Eventually, with the help of a screwdriver it came off, revealing a 4 pin p[lug. A little offputting as the Frio sockets were 3 pin; but I decided it had to be the lower 3 pins or the key would stop it getting on. Another pig of a job trying to get it and my fingers is the limited space, in the right orientation to get it on, but it went eventually.

Then I realise only one of the two fans was turning and checking, yes I’d forgotten, each fan has it’s own cable so I needed another plug on the motherboard, and can’t spot a free one.

Can one get two into one connectors for these sorts of leads ? Edit Ok I see Maplin has them. But I won’t be near one for about 8/9 days. No urgency, I hope.

The PC is back up for a test and I’m here, so I shall update further when I know whether it has improved things any.

Ah, and another BSOD. CPU temperatures seem down a bit, but still flame icons in Speedfan. GPU seems up. But of course it all depends on when one looks. Still seems rather hot to me but there again I’m used to it always looking hot.

[phillpower2]

Scraped off s much thermal rock hard gunk as I could, wiped over the top of the processor with a paper towel dipped in white spirit.

Not the method or cleaning agent that should be used for cleaning off thermal compound, scraping can mark the surface of the CPU and heatsink which reduces the cooling effect of the components and thermal compound while white spirit is oil based and leaves a residue behind that also reduces the cooling properties of the thermal compound.

If not using a cleaning fluid such as ArtiClean then 99% Isopropyl Alcohol/rubbing alcohol is recommended, methylated spirits can also be used as can acetone based nail varnish remover but care must be taken to keep the latter away from anything plastic.

I note in your reply #46 that you have Speccy installed, can you run it and post the url for us.

Regarding the second CPU cooling fan connection, use one of the 3 pin chassis fan headers on the MB, I have highlighted the MBs fan headers in the attachment below;

[Slytod]

Ah, was just using what I had to hand. I’d have to go out to buy specific stuff which looks unlikely for a bit (loads of domestic chores to do today as expecting company tomorrow & Monday). I could check for meths later, but I don’t think I have any. Interesting, my version of Speccy opens up it’s own window v1.30.370 (64bit). How do you get it on the Net, or does that need the pro version ? Edit: just seen the publish snapshot thing. I’ll give it a go. … http://speccy.piriform.com/results/6...Y5zWoLt5zQ8Abd

(As an aside I spotted its test drive bit recently; my main drive is fine but the one holding old (probably no longer required) back-ups has zero % (!) “fitness”. Bit of a shock really.)

Ah yes, I did look for fan power points.
cpu fan is the one being used for one of the cpu fans and for which I need the splitter.
pwr and fan1 1 are powering fans on the base of the case (a Firestone FT02)
fan 2 is powering the fan on the back panel (well top panel in reality)
fan 3 is difficult to spot under the graphics card, but looks as if it is powering the third fan on the base of the case

[phillpower2]

Please give us 5 minutes while I top up the coffee and go through your Speccy report, I will come back and edit this post then (y)

Replied below as you had already post back (y)

[Slytod]

Ah that’s dropped the temperatures a little more. Sometimes when one’s mind is fixated on techy issues/solutions one forgets the obvious. Just had a look (and vacuum) of the 3 mesh filters one can pull out from the 3 base fans !

[phillpower2]

Wow, that took some going backwards and forwards

Temps are already looking better in Speccy but the CPU being 48 °C when almost idle is still too hot.

See if you are able to download and install the 64-bit Windows 10 Intel Rapid Storage Technology driver for your system, see here

There are a couple of things to bring to your attention (the multiple installations of NVIDIA - Display - 12/29/2016 12:00:00 AM - 21.21.13.7653 asides)
Power Profile
Active power scheme: High performance Now that you are trying Zotac drivers as opposed to those from Nvidea this should be changed back to Balanced as the High Performance setting is a form of overclocking that will generate more heat.

Running: NVIDIA Display Container LS We are trying to do away with anything Nvidea related, what this service does here

Running: SAMSUNG Mobile Connectivity Service You mentioned this, have you ever connected a Samsung phone to your computer at all.

Running: TeamViewer 12 Never use it myself and would most certainly not leave it running, as to why explained here

Memory You have two different specs of RAM, 800MHz 1.350 V and 667 MHz 1.5V, both speeds are fine but your MBs QVL that lists the compatible RAM suggests that 1.35V RAM is not supported, list here

ST31500341AS ATA Device Your Seagate HDD looks to be failing so we should check it.
Manufacturer: Seagate
Form Factor: 3.5"
Heads: 16
Cylinders: 182,401
Tracks: 46,512,255
Sectors: 2,930,272,065
SATA type: SATA-II 3.0Gb/s
Device type: Fixed
ATA Standard: ATA8-ACS
Serial Number: 9VS141R5
Firmware Version Number: CC1H
LBA Size: 48-bit LBA
Power On Count: 312 times
Power On Time: 2384.0 days
Speed: 7200 RPM
Features: S.M.A.R.T., AAM, NCQ
Max. Transfer Mode: SATA II 3.0Gb/s
Used Transfer Mode: SATA II 3.0Gb/s
Interface: SATA
Capacity: 1397 GB
Real size: 1,500,301,910,016 bytes
RAID Type: None
S.M.A.R.T
Status: Warning

Audio The Nvidea HD audio driver could be conflicting with the onboard Realtek device, a known problem that was mentioned previously.
Sound Cards
High Definition Audio Device
NVIDIA High Definition Audio
NVIDIA High Definition Audio
NVIDIA High Definition Audio
NVIDIA High Definition Audio

[Slytod]

Wow, thanks for all that !

There seems to be a choose of downloads for the raid driver. Is it f6flpy-x64.zip you are advising I install ?
Have changed to “balanced”.
Unsure what to do about multiple -Display installations. If I look to uninstall a program I see only 5 things that start NVIDIA and none have display in the name. What should I do about them ?
I guess the same can be said for NVIDIA Display Container LS.
Yes, I connect the Samsung phone from time to time. I have their Kies programme which I use for backup and general checking of things. It need not run all the time but I guess whatever SAMSUNG Mobile Connectivity Service does it needs to be on at start up ?
TeamViewer was deliberately installed and left on. It not only allows me to take control of my woman’s PC when she is having problems and wants me to see if I can help out, it is also useful if I drive down to hers and realise I’ve forgotten some data (usually the flash drive) and I can simply make the contact and download what I wanted to take. I believed it was secure, there seems to be disagreement on that thread. If there was a better free product that did the job I’d consider using that instead, but for now it is useful.
I hadn’t realised that the RAM was incorrect; I tend to use the apps on the seller’s website to advise on the correct ones. Is it likely to be a large issue if they are left ? They seem to have been ok so far unless it is the cause of the issues that is. And the last expansion was some time ago. And having checked, the suspect ones are the original modules I bought after a long e-mail discussion with a MrMemory salesman. So I guess they seem to have worked ok. The Crucial ones are newer and I got them simply to maximise the possible memory for maximum operation/response/whatever.
As mentioned above, I spotted the second drive had 0% fitness, which was a surprise to me. Issues with current pending sector count and uncorrectable sector count, apparently. I may run some disk checking software over it later if I can find the boot CD I have somewhere, however the stuff on that drive is mainly recovered data from a hard drive of a past PC and has limited value now. Not a big deal but good to know there’s something to check.
Again, unsure how to tackle the sound card issue. On this PC I have no sound card plugged in, so it would be all motherboard hardware. Again, may I ask what I should do with the information ?

Cheers.

[phillpower2]

IRST driver here an earlier date but I suspect only because the later download has been altered in some way.

Uninstall everything that is identified as Nvidea software.

So you now know why you have Samsung updates on your computer.

TeamViewer totally your choice but I would suggest shutting it down when you know you are not going to use it, much safer that way.

The RAM we will come back to at some point as it will be time consuming to test.

For checking the HDD see below;

RE the Nvidea audio, your MB has an integrated Realtek audio chip which is your sound card and the Nvidea drivers are surplus to requirements.

Check the HDD with CrystalDiskInfo 7.0.0 Standard Edition which you can download from here once done grab a screenshot (possibly two) of the results and attach to your next reply for us.

To capture and post a screenshot;

Click on the ALT key + PRT SCR key..its on the top row..right hand side..now click on start…all programs…accessories…paint…left click in the white area …press CTRL + V…click on file…click on save…save it to your desktop…name it something related to the screen your capturing… BE SURE TO SAVE IT AS A .JPG …otherwise it may be to big to upload… Click on the Upload a File tab then after typing in any response you have… click on Post Reply like you normally would.

Screenshot instructions are provided to assist those that may read this topic but are not yet aware of the “how to”.

[Slytod]

Time to cut the lawn; but I’ll be back soon to try things out. Meanwhile the page you link to looks similar to the one I went to last time. I’ll assume it is the f6flpy-x64.zip at the top of the list.
Didn’t mind the Samsung one, it was just that it’s update joined the Nokia one I was ignoring. But downloaded and installed all that now.
Ah if I could remember to turn on TeamViewer without fail every time I went to my woman’s place I’d be able to remember to take the flash drive instead
I’ll try your CrystalDiskInfo advice. I have a version of Spinrite around somewhere, if I could find it.

Ah I’m unsure what I am to do with .inf .cat & .sys files. I’ll try downloading the seuprst,exe file instead. Oh, platform not supported.

Ah, uninstalling anything NVIDIA has left me with just one of my two screens driven, and a much coarser resolution. Do I run the Zotac driver install again ? They were never meant to uninstall.

BTW CPU temperatures running in the low 30s with just one screen and no game running !

[phillpower2]

f6flpy-x64.zip is the download that you need.

HDD does look to have problems and would suggest you keep a check on the Threshold readings to see if they get any worse.

Aye try reinstalling the Zotac drivers please, if they happen to be the stock Nvidea drivers in any event manually install just the graphics drivers, test, see how it goes and then try installing the PHYSX drivers and again test to see how it goes.

I may be a bit scarce on Sunday but will check in at some point in the day.

[Slytod]

Thanks for the file confirmation, but I don’t know what to do with the .inf .cat & .sys files it contains. Do I just extract them somewhere ? As mentioned I tried the .exe file from the same file list, assuming it held the same data, and it merely refused to install stating that the platform wasn’t supported.

I have found and been running spinrite overnight and it was about half way through this morning. Not spotted an error yet. I assume it checks wherever these errors are occurring.

I’ll do the Zotac install immediately, as the single screen low res is rather irksome.

As mentioned I expect visitors later today so there will be a point my PC attention and visits here will become rarer, and even more so tomorrow. But I’ll still be looking in when I can.

Ah, ok, bit of a problem. May be able to figure it out but. I try to run the Zotac setip,exe file and suddenly I get a message that it can not access the specified device…may not have appropriate permissions. Not had that before.

Re-extracted the files from the zip file into a different directory, seems to be installing now. But something has obviously changed with the other original. Suggestions on how to fix that would be very welcome.