Now I've gone and done it!!

[Papa_D]

disabled crossfire, no crash when starting furmark as when crossfire enabled…

[jmarket]

Sounds like you might’ve been pulling too much power. Now we wait to see if it finishes

[Papa_D]

furmark with crossfire off…

[Papa_D]

ran power calculator for components before I ordered, and I think I went like 200 watts over reccomended,Ahh yes, as you said, amps, is this psu supply enough amps…

[Papa_D]

here is PSU

http://www.rosewill.com/rosewill-quark-1000-quark-series-1000-w-full-modular-power-supply-with-led-indicator-80plus-platinum-certified-single-12v-rail-intel-4th-gen-cpu-ready-sli-crossfire-ready.html#product_tabs_Specifications

[jmarket]

You have a single rail rated at 83 Amps. From what I’m reading, each R9 390 requires 50 amps on a rail.

[Papa_D]

so what I am reading is I bought the wrong psu and need another? LOL Yep, thats me, Nailed it LOL Of all the luck, I should have gotten advice from you guys BEFORE i clicked BUY NOW LOL

[jmarket]

To verify that it is indeed a under-powered PSU to blame, run HWInfo and post how many watts and amps you’re pulling with one card, then both cards.

http://www.hwinfo.com/download.php

If that don’t work, try CPUID’s HWMONITOR. HWMONITOR | Softwares | CPUID

[Papa_D]

im sorry jmarket, but I am not sure what I need to do here. I have hwinfo downloaded and running. I can take a snip of it? I do not see an export or log. I do see where I can switch between gpu 0 and gpu 1 I currently do not have crossfire enabled…

[jmarket]

You can take a snippet if possible. Otherwise you can post what it’s pulling on GPU 0 and 1 with and without crossfire enabled.

[Papa_D]

ok here you go, thank you for taking time for me,

[Papa_D]

and this is with crossfire enabled…

[Papa_D]

what numbers are you looking at? Curious, I dont even know what to look at LOL

[jmarket]

OK unfortunately HWINFO provides no info on GPU power draw. Go ahead and try HWMONITOR from CPUID. You can remove HwInfo from your computer.

[Papa_D]

and…