Solved Yellow light on motherboard for dram AND cpu.

  • Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
    We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.

    Why not Click Here To Sign Up and start enjoying great FREE Tech Support.

    This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
Status
Not open for further replies.
I found this on the microsoft website, I know that it might not be true or the best option, just wanted to ask what was up with it.https://answers.microsoft.com/en-us/windows/forum/all/can-i-perform-a-clean-install-of-windows-11/4038c84e-0519-41e6-bcdb-8444bcabc4f5
 
And I just want to confirm, when I boot windows it will give me the option to download the Aorus drivers? do I have to use a seperate USB stick to take drivers from the motherboard website or what?
 
Sorry for all of my questions, do I need to worry about my drivers before installing windows? Or can I install windows and then add the drivers after?
 
Mr. Rosy said:
Or can I install windows and then add the drivers after?
Click to expand...
Are you doing 11 or 10?
The normal way is to have the drivers from the website first.
1) Install windows
2) Install drivers
3) connect internet.

However if you have the setting enabled in the bios you can use that to install the drivers for you direct from the internet.
 
PeterOz said:
(In BIOS Setup, make sure Settings\Gigabyte Utilities Downloader Configuration\Gigabyte Utilities Downloader is set to Enabled.
After you install the operating system, a dialog box will appear on the bottom-right corner of the desktop asking if you want to download and install the drivers and GIGABYTE applications via GIGABYTE Control Center (GCC). Click Install to proceed with the installation.
Click to expand...
From post #79
 
Okay so I've almost completed the installation and im at the screen where its trying to connect me to a wifi network, but it's only showing ethernet as an option. I connected my MB antenna to the screws on the back, and nothing seems wrong but I'm not sure if I was supposed to do something to turn the antenna on.
 
Mr. Rosy said:
Okay so I've almost completed the installation and im at the screen where its trying to connect me to a wifi network, but it's only showing ethernet as an option. I connected my MB antenna to the screws on the back, and nothing seems wrong but I'm not sure if I was supposed to do something to turn the antenna on.
Click to expand...
Sorry I was not here to answer I had to go to work.
So you are running?
Windows 10 or windows 11?
Did you use
Gigabyte Utilities Downloader to install the drivers?
 
I tried to use the Gigabyte utilities downloader when it popped up, but it said it failed to install the files after loading. I'm not sure what that means, but I think I only have the windows drivers right now. Is there a way I can access the utilities downloader again to try to get it to work?
 
I finally got my computer working! Thank you so much for all of your help and support. The thread can be closed, and I will definitely consider donating.
 
Glad you are sorted and thanks for letting us know (y)

Just a btw, I hope that you will keep in mind that this would have been resolved a whole lot sooner if you had followed my guidance on the need to always have a keyboard attached from the outset ;)
 
Status
Not open for further replies.
Top Bottom