Hey guys, I need you're help...
I have a b450m ds3h Rev 1 board. I've been running win 10 from a Kingston SSD. However I recently purchased a M.2 NVME 1TB WD Blue SN550, but I'm having insane problems with it.
I connected it & booted into windows like normal. Windows doesn't detect it, nor does disk manager. I went into bios & it does detect it & even the self test setting within the NVME settings passes. So all as it should be.
Now, If I boot to USB to start to install windows, the NVME drive shows up. I installed windows to the NVME drive & it boots into windows like normal & all the other sata drives are also shown up. However, if I then boot windows on my kingston SATA drive, the NVME drive disappears.
Both drives are both GPT. I have tried using my pro Paragon partition manager suit & migrate windows which has always worked before onto the NVME when I installed it on the NVME drive after booting into the windows on that drive. However, I get the windows logo but then nothing more, just a constant boot loop.
I really do not want to have to start again with a fresh windows... So I need help why I cant get my NVME drive to detect within windows when I've booted into my kingston SSD drive or why if I migrate my windows from my Kingston SSD drive to the NVME it gives me a boot loop.
I've looked on the website & manual & I can't find or maybe I just don't understand the info, to know if my M.2 drive when in use, disables any of my SATA ports or anything. But they all work if I boot into my NVME on a fresh windows install, so I'm at a loss. Also my firmware is the latest for the board.
Thanks in advance
I have a b450m ds3h Rev 1 board. I've been running win 10 from a Kingston SSD. However I recently purchased a M.2 NVME 1TB WD Blue SN550, but I'm having insane problems with it.
I connected it & booted into windows like normal. Windows doesn't detect it, nor does disk manager. I went into bios & it does detect it & even the self test setting within the NVME settings passes. So all as it should be.
Now, If I boot to USB to start to install windows, the NVME drive shows up. I installed windows to the NVME drive & it boots into windows like normal & all the other sata drives are also shown up. However, if I then boot windows on my kingston SATA drive, the NVME drive disappears.
Both drives are both GPT. I have tried using my pro Paragon partition manager suit & migrate windows which has always worked before onto the NVME when I installed it on the NVME drive after booting into the windows on that drive. However, I get the windows logo but then nothing more, just a constant boot loop.
I really do not want to have to start again with a fresh windows... So I need help why I cant get my NVME drive to detect within windows when I've booted into my kingston SSD drive or why if I migrate my windows from my Kingston SSD drive to the NVME it gives me a boot loop.
I've looked on the website & manual & I can't find or maybe I just don't understand the info, to know if my M.2 drive when in use, disables any of my SATA ports or anything. But they all work if I boot into my NVME on a fresh windows install, so I'm at a loss. Also my firmware is the latest for the board.
Thanks in advance
