Hello. When I start up the laptop, it gives the error: "check cable cannenction! Pxe-m0f: exiting intel PXE ROM." I changed the battery of laptop a few months ago and it runs on windows 7. Strange thing is that sometimes it does not give me the error and I can work with my laptop and sometimes it gives me the error and the laptop restarts. What should I do?
startup problem with lenovo G510
- Thread starter movebymove
- Start date
-
Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.
Why not Click Here To Sign Up and start enjoying great FREE Tech Support.
This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More. -
Hello everyone We want to personally apologize to everyone for the downtime that we've experienced. We are working to get everything back up as quickly as possible. Due to the issues we've had, your password will need to be reset. Please click the button that says "Forgot Your Password" and change it. We are working to have things back to normal. Emails are fixed and should now send properly. Thank you all for your patience. Thanks, PCHF Management
- Status
Hello movebymove,
You mention having changed the CMOS battery, after doing this did you set the HDD as the first boot device in the BIOS.
The PXE device btw should not be enabled as a boot device in the BIOS unless the computer has been set up to boot from a network connection.
Download then run Speccy (free) and post the resultant url for us, details here, this will provide us with information about your computer hardware + any software that you have installed that may explain the present issue/s.
To publish a Speccy profile to the Web:
In Speccy, click File, and then click Publish Snapshot.
In the Publish Snapshot dialog box, click Yes to enable Speccy to proceed.
Speccy publishes the profile and displays a second Publish Snapshot. You can open the URL in your default browser, copy it to the clipboard, or close the dialog box.
You commonly get such an error when the BIOS does not detect a boot device during the power on self test (POST) so it would be wise to back up your important data from the HDD in case it is failing.
You mention having changed the CMOS battery, after doing this did you set the HDD as the first boot device in the BIOS.
The PXE device btw should not be enabled as a boot device in the BIOS unless the computer has been set up to boot from a network connection.
Download then run Speccy (free) and post the resultant url for us, details here, this will provide us with information about your computer hardware + any software that you have installed that may explain the present issue/s.
To publish a Speccy profile to the Web:
In Speccy, click File, and then click Publish Snapshot.
In the Publish Snapshot dialog box, click Yes to enable Speccy to proceed.
Speccy publishes the profile and displays a second Publish Snapshot. You can open the URL in your default browser, copy it to the clipboard, or close the dialog box.
Hello phillpower2. Thank you for replying. I send it here:
You mention having changed the CMOS battery, after doing this did you set the HDD as the first boot device in the BIOS.
Spotted what could be the cause of the issue but before we go into too much detail can you also answer the question that was asked.
You are welcome btw
Spotted what could be the cause of the issue but before we go into too much detail can you also answer the question that was asked.
You are welcome btw
You mention having changed the CMOS battery, after doing this did you set the HDD as the first boot device in the BIOS.
Spotted what could be the cause of the issue but before we go into too much detail can you also answer the question that was asked.
You are welcome btw
I checked it now. It was already as the first boot device.
Can I ask that you do not quote every reply as I have to read the full post to make sure nothing gets missed,, thanks.
Makes what I spotted all the more likely as to be the cause then.
The below is information concerning your HDD, it is low on free storage space on the C: partition where Windows lives + the drive is running hot, the latter could be as a result of the low amount of free storage space.
S.M.A.R.T
Status: Good
Temperature: 50 °C
Temperature Range: Warning (50 °C to 55 °C)
Partition 1
Partition ID: Disk #0, Partition #1
Disk Letter: C:
File System: NTFS
Volume Serial Number: C0ABE98E
Size: 150 GB
Used Space: 136 GB (90%)
Free Space: 14 GB (10%)
For Windows to be able to run efficiently and to be able to update you need to have between 20 and 25% of the partition or drive available as free storage space at all times, if you don`t you risk Windows becoming corrupt or not being able to update which puts you at risk of malware attack.
Data only storage devices should not be allowed to get any lower than 10% of free storage space of the full capacity of the drive/partition on the drive, this also to avoid data corruption.
Please note that storage devices can physically fail if the amount of free storage space is allowed to drop below the required 10 or 20/25% minimum.
Uninstall as many unused programs, games, videos and music files as you can and get yourself another means of backing up to, post back when you have between 20 and 25% free storage on the C: drive/partition and we can go from there.
Makes what I spotted all the more likely as to be the cause then.
The below is information concerning your HDD, it is low on free storage space on the C: partition where Windows lives + the drive is running hot, the latter could be as a result of the low amount of free storage space.
S.M.A.R.T
Status: Good
Temperature: 50 °C
Temperature Range: Warning (50 °C to 55 °C)
Partition 1
Partition ID: Disk #0, Partition #1
Disk Letter: C:
File System: NTFS
Volume Serial Number: C0ABE98E
Size: 150 GB
Used Space: 136 GB (90%)
Free Space: 14 GB (10%)
For Windows to be able to run efficiently and to be able to update you need to have between 20 and 25% of the partition or drive available as free storage space at all times, if you don`t you risk Windows becoming corrupt or not being able to update which puts you at risk of malware attack.
Data only storage devices should not be allowed to get any lower than 10% of free storage space of the full capacity of the drive/partition on the drive, this also to avoid data corruption.
Please note that storage devices can physically fail if the amount of free storage space is allowed to drop below the required 10 or 20/25% minimum.
Uninstall as many unused programs, games, videos and music files as you can and get yourself another means of backing up to, post back when you have between 20 and 25% free storage on the C: drive/partition and we can go from there.
After downloading speccy I noticed that I am running low on C so I deleted a lot of stuff. now 39 G of 150 G on C is available. I also noticed I had not downloaded and installed any updates for a long time so I also let that happen and I can already sense that this restarting problem is happening less often. But for example if I turn off my laptop right now and I decide to turn it on immediately, there is a high chance it will restarts. I notice that my laptop needs to cool down and it is hot most of the time. I also noticed that when my laptop restarts and does not work properly, I don't have any HDD option in my bios setup. It is only SATA ODD and network boot. But when my laptop works properly, I have HDD option in my BIOS.
I have done most of these things mentioned in the link but things are not different. today i had a lot of problems again to get my laptop work properly. my theory is that the new battery is causing problems but then again if i try to use my laptop with out the battery and with charger, things are not different.
Can you post a new Speccy url for us + do the following;
Download and run CrystalDisk info standard edition from here
Run the program, grab any screenshots and attach to your next reply for us.
To capture and post a screenshot;
Click on the ALT key + PRT SCR key..its on the top row..right hand side..now click on start...all programs...accessories...paint....left click in the white area ...press CTRL + V...click on file...click on save...save it to your desktop...name it something related to the screen your capturing... BE SURE TO SAVE IT AS A .JPG ...otherwise it may be to big to upload... after typing in any response you have... click Attach file to add the screenshot.
Screenshot instructions are provided to assist those that may read this topic but are not yet aware of the “how to”.
Download and run CrystalDisk info standard edition from here
Run the program, grab any screenshots and attach to your next reply for us.
To capture and post a screenshot;
Click on the ALT key + PRT SCR key..its on the top row..right hand side..now click on start...all programs...accessories...paint....left click in the white area ...press CTRL + V...click on file...click on save...save it to your desktop...name it something related to the screen your capturing... BE SURE TO SAVE IT AS A .JPG ...otherwise it may be to big to upload... after typing in any response you have... click Attach file to add the screenshot.
Screenshot instructions are provided to assist those that may read this topic but are not yet aware of the “how to”.
The HDD looks ok, a bit warm but still ok.
Something that I did notice is that you have the Windows Power Plan set to Balanced, because your notebook has a dedicated GPU it should be set to High Performance or the GPU will not get enough power to function, this unlikely to be the cause of the HDD occasionally going missing though.
Question, how come you have not yet upgraded to Windows 10 for free while you still can.
Something that I did notice is that you have the Windows Power Plan set to Balanced, because your notebook has a dedicated GPU it should be set to High Performance or the GPU will not get enough power to function, this unlikely to be the cause of the HDD occasionally going missing though.
Question, how come you have not yet upgraded to Windows 10 for free while you still can.
I had never used balanced option before yesterday. I just did it because I thought it might help with overheating problem. Today I even used power saver option but the problem with power saver is that after a few minutes, the laptop goes to sleep and locks and I have to login but then windows does not come up and I have to shut down the laptop by holding the power button. The same problem I am struggling while turning on the laptop.
I am just comfortable with windows 7. I installed it last year and it has been working well.
I am just comfortable with windows 7. I installed it last year and it has been working well.
Apart from the HDD getting hot when it has been in use there is zero wrong with your computer, only two other suggestions, get yourself a notebook cooling pad and preferably one that is mains powered rather than USB and if all else fails remove the HDD, give the inside of the notebook and the HDD contacts a proper clean with canned compressed air then refit the drive and see how it goes.
OK. Why should my cooling pad be one with mains powered rather than USB? I found something online which works with USB.
The USB type would put more load on the notebook which in turn would generate more heat.
To reduce the heat, is it a good idea to 1. disable my GPU 2. remove my battery and use only charger?
You could disable the GPU when not gaming and likewise charge the battery up to 100% then remove and store it somewhere safe, just don`t forget to run it down and the recharge it back up to 100% every now and then.
Not a good idea to leave the bottom of the notebook exposed.
Not a good idea to leave the bottom of the notebook exposed.
If I may interrupt.
what is the laptop sitting on when using it and or not using it?
where did the new battery come form?
what is the laptop sitting on when using it and or not using it?
where did the new battery come form?
- Status