Laptop Crashing
- Thread starter mtblillie
- Start date
-
Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.
Why not Click Here To Sign Up and start enjoying great FREE Tech Support.
This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More. -
Hello everyone We want to personally apologize to everyone for the downtime that we've experienced. We are working to get everything back up as quickly as possible. Due to the issues we've had, your password will need to be reset. Please click the button that says "Forgot Your Password" and change it. We are working to have things back to normal. Emails are fixed and should now send properly. Thank you all for your patience. Thanks, PCHF Management
- Status
I still am unable to create a bootable drive. I follow the steps provided, but when I run the image writing software (after selecting the correct USB thumb drive and image), it says 0% complete and then just shuts down. I have tried re-downloading the software, re-formatting the thumb drive, but nothing works. I have included an image of the program just before it shuts off.
Attachments
Actually yes, there is another computer I can try, I will do that. I do have another thumb drive but I would like to try using the other computer first, simply because I use it for one of my jobs and it would be a bit of pain to back it all up and run the test, but I will do that if I have to.
The Windows memory test came up with no errors. I am hopeful that this is a good sign, but I am aware that it may not detect certain problems that MemTest might. I will update if I can get memtest working through one of these other options.
The Windows memory test came up with no errors. I am hopeful that this is a good sign, but I am aware that it may not detect certain problems that MemTest might. I will update if I can get memtest working through one of these other options.
So some good news, I was able to successfully set up the thumb drive. I brought it home and attempted to run the memtest startup, but could not find it in the advanced boot menu. So I swapped usb ports and it popped up. I guess the port I was using isn't working correctly, which is probably why I couldn't set up memtest to begin with.
I ran memtest, which found no errors. Attached is the report.
I ran memtest, which found no errors. Attached is the report.
Good news that the present RAM passed the tests, the outcome though reinforces my suspicions in that your computer does not have enough physical memory.
Click "Start" → type msconfig in the search box and press Enter. On the "Boot" tab, click "Advanced options" → make sure "Maximum memory" is not selected and that there is a 0 in the box.
Click "Start" → type msconfig in the search box and press Enter. On the "Boot" tab, click "Advanced options" → make sure "Maximum memory" is not selected and that there is a 0 in the box.
Was the port the USB 3.0 type and the port that you were able to use the USB 2.0 type.
Done, the setting s above were already in this configuration, I didn't have to change anything.
If this is true, it's weird that I have crashes sometimes just modifying folders. I wonder if there is something in the background that is killing the memory. I totally understand Photoshop taxing the system, but file explorer? Or maybe that is just an issue that windows 10 has?
I'm honestly not sure. In device manager I see several references to USB 3.0 but not 2.0, and I can't determine from the list which port is which.
If me I would replace the present 4GB stick of RAM with an 8GB stick, 64-bit Windows will run when there is only 4GB of RAM but to get the best out of 64-bit Windows having 8GB is recommended.
USB 3.0 ports are normally blue while USB 2.0 ports are black.
USB 3.0 ports are normally blue while USB 2.0 ports are black.
Unfortunately no, this work week is the busiest of the year for me, this is the first time I have turned on my computer since I posted here last.
All the ports appear to be black (or grey, rather), so I am assuming they are 2.0. I looked up a picture of the blue 3.0 to be sure I wasn't mistaking gray for blue, but it seemed pretty obvious on the picture.
I was wondering if this would be a good idea, if it is simply happening due to overtaxing the RAM. I will look into getting an upgrade. I'm not particularly fond of the idea of replacing the RAM memory simply because this particular laptop wasn't designed to be taken apart very easily, but if it will help I will give it a try.
Thanks for all the help!
There are various different models of the Dell inspiron 15 3000 series notebook, can you tell us your exact model so that we can take a look at the service manual,
Dell Inspiron 15 3000 notebooks that have an Intel CPU, 3552, 3558, 3573 and 3576, which one of these do you have?
Dell Inspiron 15 3000 notebooks that have an Intel CPU, 3552, 3558, 3573 and 3576, which one of these do you have?
Looked at the user manual which if you haven't got you can download from here
Swapping out the RAM is real easy on this model,just follow each of the steps and you will be fine, make sure that after removing the main power brick and if connected the AC adaptor that you press the notebook power on button for twenty or so seconds to get rid of any residual charge in the notebook and before handling the RAM ground yourself by briefly touching something metallic like a domestic radiator pipe etc.
These upgrades are guaranteed compatible when you order from Crucial.
Same spec of Crucial RAM for $4 less from here
Please note that there is no point in purchasing the more expensive 1866MHz RAM as your CPU determines what the maximum compatible speed of RAM is which in this case is DDR3 1600MHz and more importantly because your notebook only has the one memory slot any RAM upgrade will still only work in single channel which = 800MHz as opposed to the 1600MHz that the RAM is capable of when used as one of a pair of matching sticks of RAM, you are looking to be able to use more demanding programs and have more tabs open which an 8GB stick of RAM will help you to achieve, it will not allow any other computer hardware to run faster so you must decide for yourself what you are wanting to achieve before making any purchase.
Swapping out the RAM is real easy on this model,just follow each of the steps and you will be fine, make sure that after removing the main power brick and if connected the AC adaptor that you press the notebook power on button for twenty or so seconds to get rid of any residual charge in the notebook and before handling the RAM ground yourself by briefly touching something metallic like a domestic radiator pipe etc.
These upgrades are guaranteed compatible when you order from Crucial.
Same spec of Crucial RAM for $4 less from here
Please note that there is no point in purchasing the more expensive 1866MHz RAM as your CPU determines what the maximum compatible speed of RAM is which in this case is DDR3 1600MHz and more importantly because your notebook only has the one memory slot any RAM upgrade will still only work in single channel which = 800MHz as opposed to the 1600MHz that the RAM is capable of when used as one of a pair of matching sticks of RAM, you are looking to be able to use more demanding programs and have more tabs open which an 8GB stick of RAM will help you to achieve, it will not allow any other computer hardware to run faster so you must decide for yourself what you are wanting to achieve before making any purchase.
Well that is unfortunate I was under the impression that it had dual channel RAM, but now that I look at the manual it only has the single...I was starting to think about 16GB too, but oh well, something to pay closer attention to the next time.
At least the slot is relatively close to the surface of casing, unlike the fan which I had been originally thinking I would have to replace. The one thing I don't really like is that you have to take out the keyboard to get the casing off...but maybe I am still used to older model laptops.
It may be a week or two before I can get the new stick in and installed. I'm not sure if you want to keep the thread open that long or not. Either way, thank you so much for your help with this!
At least the slot is relatively close to the surface of casing, unlike the fan which I had been originally thinking I would have to replace. The one thing I don't really like is that you have to take out the keyboard to get the casing off...but maybe I am still used to older model laptops.
It may be a week or two before I can get the new stick in and installed. I'm not sure if you want to keep the thread open that long or not. Either way, thank you so much for your help with this!
You don`t with your model of notebook, see pages 23 to 26 of the user manual at the link that I attached in my reply #54.
We will leave your thread open for a few days more and close it if we do not hear back from you by then, send a member of staff a PM if you need the thread reopening.
You are welcome btw
- Status