Gpu Very2 Hard To Detect

  • Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
    We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.

    Why not Click Here To Sign Up and start enjoying great FREE Tech Support.

    This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
Status
Not open for further replies.
Cat Man

Cat Man

PCHF Member
Jan 13, 2025
7
0
25
Hi, i just wondering why my gpu very hard to detect i already reseat like 20 times, use riser, change other slots and use other pc but very2 hard to detect. i need help with rx570 series all driver good but i found my gpu just 2 pin like cut in half

Spec pc one:
Motherboard: ga-z68ap-d3(f3)
Power supply: 550w

Spec pc two:
Motherboard: forgot
Power supply: 460w
 
Hello

Check the slot for damage , check the power cables. But that vid card needs at least 500 to 550 watt psu on Spec pc 2. What brand names are those 2 psu's ?
 
G'day, and welcome to the forum. (y)

A broken contact pin could explain your issue.
And as veeg has said, it could also be lack of power.
Any chance you can use the GPU without the riser for now, to test the riser isn't the cause.

Can you show us a picture of the GPU contact pins?
 
veeg said:
Hello

Check the slot for damage , check the power cables. But that vid card needs at least 500 to 550 watt psu on Spec pc 2. What brand names are those 2 psu's ?
Click to expand...
I have 650w psu 80 plus bronze
 
Bruce said:
G'day, and welcome to the forum. (y)

A broken contact pin could explain your issue.
And as veeg has said, it could also be lack of power.
Any chance you can use the GPU without the riser for now, to test the riser isn't the cause.

Can you show us a picture of the GPU contact pins?
Click to expand...
 

Attachments

  • IMG_20250114_172005.webp
    IMG_20250114_172005.webp
    770.5 KB Views: 15
  • IMG_20250114_171940.webp
    IMG_20250114_171940.webp
    987.7 KB Views: 13
  • IMG_20250114_171805.webp
    IMG_20250114_171805.webp
    599.4 KB Views: 9
  • IMG_20250114_171805.webp
    IMG_20250114_171805.webp
    597.5 KB Views: 10
  • IMG_20250114_171904.webp
    IMG_20250114_171904.webp
    488.1 KB Views: 11
veeg said:
Hello

Check the slot for damage , check the power cables. But that vid card needs at least 500 to 550 watt psu on Spec pc 2. What brand names are those 2 psu's ?
Click to expand...
Should i change to other one?
 
So you have the same GPU tried in 2 PC's with the some fault - that would suggest the GPU is at fault.
Can you get your hands on another GPU and see if that one works in your PC?
 
Bruce said:
So you have the same GPU tried in 2 PC's with the some fault - that would suggest the GPU is at fault.
Can you get your hands on another GPU and see if that one works in your PC?
Click to expand...
I remember last time my gpu fan spin full speed and it restart it self but this thread resolved because i put other gpu but i have gpu mining edition and one gpu to make display soo simply i have 2 gpu right now :) you can see here: https://spec-ify.com/profile/864520ba
 
The link in post #9 says "page not found".
So you have two add-on graphics cards in the PC?
Which GPU has cables going to the monitor?

Let’s get your system specs.
No personal data is published and everything shown is safe.

Download Speccy by Piriform.
In Speccy, click File > Publish Snapshot > Copy to Clipboard > Close.
Paste that link into your post. Is Speccy safe?
 
Status
Not open for further replies.
Top Bottom