Acer Nitro 50 610 Case swap ? Help please

[Berkay ortakci]

Hello guys, I have a Acer N50 610 and ı want to swap my case because of the temperatures. Can ı put everything in this case in a new gaming case.

I didn't find any information about my motherboard type but i think it looks like ATX sizes.

Please help me. I was thinking the buy MSI MAG forge 100R . Is it ok for my equipments

​

 

[Bruce]

that motherboard is proprietary so will probably only fit in Acer supplied cases.
it's not a standard mobo by any stretch of the imagination!

and there is no spot to add more fans, which only leaves the option of getting a better processor fan and heat sink and a better chassis fan.

 

[Berkay ortakci]

Thank you for your reply, If I buy new motherboard then can ı use this equipments in new case. or my gpu special for my motherboard ?

sorry I don't understand much pc things..

 

[Bruce]

you will need the complete specs of the current motherboard.
what processor socket does it have?
what is the memory speed?

the new motherboard has to have the same socket type and memory MHz as the current one otherwise you'll be replacing those parts as well. otherwise all the other components should simply swap over: graphics card, power supply

for example, the current one has a 10th gen Intel processor, so probably a socket 1151 but it'll need confirming.

then due to the hardware changes, Windows 10 may have to be reactivated, no biggie, but it'll just give you an idea that you are not only up for a new motherboard and new case, there will be flow-on affects.

and as you freely admit, not being up on PC's too much, you'll probably be wanting all this done by someone else.

 

[phillpower2]

Thread closed due to lack of feedback from the OP.