Recent hardware change

[Sm0nke]

So I’ve recently switched from a Dell 9020 motherboard to a gigabyte ga-h81m-ds2 and transferred my i7-4770 into the new one. I also got a rx 570 and put that in too.

The issue im having is that I can’t use the computer. I can get into bios fine, but if I let the load up screen run out, it trys auto repairing and failing. Then sometimes it comes up with a blue screen message. I’ve somehow managed to stop the bluescreen but now it seems like my storage device is corrupted because I get into the login screen and it says “The User Profile Service service failed to sign-in” then promotes “the instruction at 0x00007ff72a6625c6 referenced memory at 0x0000000000000004c8. The memory could not be read”.

I would really appreciate some help here.

[veeg]

Hello

Hopefully some of our members will chime in soon..

jmarket @phillpower2

[Evan_Omo]

Hi,

Are you able to boot the computer into Safe Mode? Did try booting up the system with just one stick of RAM installed and seeing if it boots into Windows successfully?

[Sm0nke]

Hi,

Are you able to boot the computer into Safe Mode? Did try booting up the system with just one stick of RAM installed and seeing if it boots into Windows successfully?

I can’t boot into safe mode because the motherboard on supports safe mode for Windows 8 whilst I have a Windows 10, I’ll try 1 stick of ram

[Sm0nke]

I can’t boot into safe mode because the motherboard on supports safe mode for Windows 8 whilst I have a Windows 10, I’ll try 1 stick of ram

Nope 1 stick doesn’t work either

[Evan_Omo]

Did you try using each stick of RAM by itself to see if there is any difference?

Also try resetting the BIOS back to default values on the new motherboard and see if that works. I know that Windows typically may not boot when you change out motherboards like this so you may need to repair the Windows installation. Do you have a bootable Windows 10 USB drive?

You can create a Windows bootable flash drive by downloading the media creation tool, Download Windows 10.

[Sm0nke]

Also try resetting the BIOS back to default values on the new motherboard and see if that works. I know that Windows typically may not boot when you change out motherboards like this so you may need to repair the Windows installation. Do you have a bootable Windows 10 USB drive?

No

[Evan_Omo]

Get yourself an 8 GB or a 16 GB flash drive and create a bootable Windows 10 flash drive using the Media Creation Tool in the link I provided above and I can assist you with repairing the Windows 10 OS so the computer can hopefully boot into Windows 10.

[Sm0nke]

Get yourself an 8 GB or a 16 GB flash drive and create a bootable Windows 10 flash drive using the Media Creation Tool in the link I provided above and I can assist you with repairing the Windows 10 OS so the computer can hopefully boot into Windows 10.

Any difference between usb stick and flash drive?

[Sm0nke]

O

Any difference between usb stick and flash drive? I also managed to get it into safe mode. It is now taking me through the very beginning of starting a computer even though my storage device was used in the old system. Is this normal?

[Evan_Omo]

No its the same terminology.

If you can get into Safe Mode try Performing a Clean boot in Windows and see if the computer boots up successfully in Normal mode.

[Sm0nke]

Im in safe mode but the screen is flickering so much and I can’t click on anything, like it’s constantly rebooting

[Sm0nke]

How would I go about using the usb stick

[Sm0nke]

Im in safe mode but the screen is flickering so much and I can’t click on anything, like it’s constantly rebooting

It doesn’t flicker when im on the alt shift tab screen

[Sm0nke]

Clean booting did nothing and I don’t know what to do with the usb