Bluescreen, blackscreen, no boot at home, but works normal at a computerguy?!

[Nasp9010]

Hello,

unfortunatly my pc doesnt start right now anymore, so i cant give any specifications, it is updaten to Windows 10. It startet with a sudden bluescreen. I couldnt see the stopcode so fast. After - no reboot, blackscreen.

I brought it to a computerguy. But at his place the pc worked totally normal. They tried everything to mae the pc crash - nothing. As soon as the pc comes back home – crash: bluescreen with stopcode “PAGE_FAULT_IN_NONPAGED_AREA”, blackscreen, no boot anymore. It only startet up again after a long time staying off. Then it started with “The system has experienced boot failures because of overlocking. Lastest BIOS setups may not coincide with current H/W states.” Etc. I start the BIOS setup and “Load with optimized default”. Instantly blue screen with stopcode “MEMORY_MANAGEMENT” and just after “IROL_NOT_LESS_OR_ EQUAL”

Im not familiar with all that BIOS and CMOS things. Anyone an idea?

Throw it out and burn it?

[veeg]

Hello

Hopefully some of of our members will chime in soon.. Please give us your complete pc spec’s.

jmarket @phillpower2

[Nasp9010]

Hello

Hopefully some of of our members will chime in soon.. Please give us your complete pc spec’s.

@jmarket @phillpower2

Hello, thanks, yes i hope someone gets an idea. How can i find out my pc spec’s since it does not start? I dont know them by heart … maybe it can help to make a picture of the indside?

[Bastet]

At home do you have any external hard drives connected or even a USB hub?
If so try disconnecting these & restarting.
Do you have fast startup enabled? If so disable it.

[Nasp9010]

At home do you have any external hard drives connected or even a USB hub?
If so try disconnecting these & restarting.
Do you have fast startup enabled? If so disable it.

Right now i have a usb keyboard and HDMI screen. But the computerguy got the screen and keyboard as well to test them. Fast startups – i guess i have, i will try to disable them as sovs as my pc will start up again. o_O

[Nasp9010]

It’s alive! It started out of nothing.

And the screen stats like that. Anyone knows what would be elever to do? After all, I’m afraid of touching anything.

[veeg]

Sounds like something may be loose inside.

[Bastet]

Is there anything else connected at home which wasn’t at the repair shop?
If not then there might be an intermittent fault with some connections.
Check graphics card & if PC is overclocked reset this back, you can also try resetting the bios back to default.

[veeg]

Also shut down the pc. Unplug the keyboard,restart the pc. What happens?

[Nasp9010]

Well right now it shows this last motherboard screen for BIOS.

I can “post screen”, “BIOS setups / Q-flash”, “Xpress recovery 2”, “Boot menu”, “Q-flash”

I dont really know what any of them mean…

[veeg]

Well right now it shows this last motherboard screen for BIOS.

I can “post screen”, “BIOS setups / Q-flash”, “Xpress recovery 2”, “Boot menu”, “Q-flash”

I dont really know what any of them mean…

So the pc booted?

[Nasp9010]

So the pc booted?

Ja, it only shows the motherboard desktop, where you cango to boot menu or bios setup

[veeg]

OK,well it is hard to determine if a key on the keyboard is stuck. You could try a different keyboard to see if it will boot up correctly.

[Nasp9010]

OK,well it is hard to determine if a key on the keyboard is stuck. You could try a different keyboard to see if it will boot up correctly.

Ok i took out the keyboard and startet again. The bios beep came - the motherboard desktop came up and now the screen is black with that blinking line in the top left corner.

[Nasp9010]

Well, last stand is: i turn the pc off an on again. Then suddenly there came a blue screen like on windows 10, that ask me to choose a keyboard layout. But since i had no keyboard on the pc, i could not choose anything.

So i took an other keyboard and connected it to the pc, i started again, but only the motherboard menu, and after trying again off an on - black screen …