Destiny 2 fps problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gravy_13
    PCHF Member
    • Apr 2022
    • 4

    #1

    Destiny 2 fps problem

    I have 6 fans all intake on two 360mm radiators hooked up to a full liquid cooling loop, and im still hitting a low fps. HWInfo says im hitting a thermal cap but my gpu reads it hitting only 77 degrees, even lowering the graphics quality doesn’t bring back much to any fps. is this a heat issue or a bottleneck issue, or a setting thats restricting the frames issue? im at a loss.

    My Specs:
    CPU: Ryzen 7 3700x
    GPU: Gigabyte 3080 ti OC
    PSU: RM750 gold+
    RAM: 4 x 8gb trident g.skill rgb
    Case: lian li o-11 dynamic evo
    MoBo: MSI B550 Tomahawk
    Storage: 2 x 1tb HDD and 1 X MP600 m.2 ssd

    Cooling loop goes… Reservoir → gpu → cpu → radiator → radiator → reservoir
    A 3dMark test got 4k on the gpu and 9k on the cpu but the overall was 4.3k score hitting an average of 25 to 30 fps
  • veeg
    PCHF Director
    • Jul 2016
    • 8977

    #2
    Hello

    What speed do you have your memory clocked at?

    Comment

    • Gravy_13
      PCHF Member
      • Apr 2022
      • 4

      #3
      me and a friend checked and saw i was running it at 3600, which was too much for my cpu to handle so we set it at 3200 which is what it could handle which solved a huge jump in fps but not entirely.

      Comment

      • veeg
        PCHF Director
        • Jul 2016
        • 8977

        #4
        How many peripherals do you have connected at this time when it over heats?

        Comment

        • Gravy_13
          PCHF Member
          • Apr 2022
          • 4

          #5
          only 3 monitors 2 are 27 inch and 1 is 24 i tried with only one monitor same issue happens, but i got some guys on another forum to help me out with this and they solved it! thanks for responding tho

          Comment

          • veeg
            PCHF Director
            • Jul 2016
            • 8977

            #6
            Ok ..i will mark your thread..

            Comment

            Working...