Pls help me

[Mrsquirrel]

I build my pc and it worked fine but then I got hit with BSOD after BSOD after BSOD en now the rgb on my ram is not working anymore and the debug lights of CPU and DRAM are active

Specs:
A620m pro rs wifi
rx 6900 xt
Ryzen 5 7600x
Kingston fury 1x32gb 5600mhz

[xrobwx71]

Follow the direction here please. https://pchelpforum.net/threads/post...section.76904/

[phillpower2]

rx 6900 xt

What brand is the GPU, is it an AMD card or a third party such as ASRock, ASUS, Gigabyte etc.

What is the brand and model name or number of the PSU.

Kingston fury 1x32gb 5600mhz

Which slot on the MB do you have the RAM populating.

[Mrsquirrel]

phillpower its a phantom gaming one from ASRock and my psi is a beqiet 850watt

[phillpower2]

my psi is a beqiet 850watt

Can we have the model name or number that was also asked for.

Regardless of the above, the present PSU does not meet the minimum PSU requirements that are stated by ASRock here

Which slot on the MB do you have the RAM populating.

Can you also answer this,

[Mrsquirrel]

[HEADING=2]be quiet! System Power 10 850W PSU[/HEADING]

[Mrsquirrel]

ram populating A2 also tried B2 its in B2 rn

[phillpower2]

The PSU even if it had a claimed adequate output of 900W it is still not of the high end quality that your GPU needs, it is in fact rated as – Tier C • Low-end

Slot B2 - the furthest slot from the CPU is shown to be the correct slot.

In addition to the PSU being too weak, the RAM is not the correct spec and should you ever add a second matching stick you will not be able to enable XMP/EXPO as your CPU cannot handle RAM any faster than 5200MT/s, you can confirm this for yourself here

[Mrsquirrel]

No fr help me im gaining insane from this 2009 crapbook
I don’t care about all of that just let me make my pc work again
and I don’t give a Frick that my cpu can handle dual Chanel ram so if I really want it ill buy a new cpu

[phillpower2]

and I don’t give a Frick that my cpu can handle dual Chanel ram so if I really want it ill buy a new cpu

Wrong attitude to be taking.

You have been told more than once that your PSU is too weak to support your GPU, end of.

the rgb on my ram is not working anymore and the debug lights of CPU and DRAM are active

The above is clearly telling you that there is a problem with your RAM and your CPU.

Remove the add on GPU from the MB and hook your screen up to the appropriate video port on the MB.

Have you tried clearing the BIOS by removing the CMOS battery for 20 minutes or so.

[Mrsquirrel]

tried it for 10 sec but ill try for 20min
you will hear my reply tomorrow

[Bruce]

As a side note…

Feel free to vent your frustration but do so in a civilised manner. This is an open forum for all ages and opinions, and you are expected to put forward your ideas thoughtfully, logically, and calmly.

Remember you have the right to your own opinion, the right to express it freely and without discrimination, but also accept it may differ from others and that it can be wrong.

[Mrsquirrel]

didn’t work