Pc powers on, no display no beeps

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jeff_Law
    PCHF Member
    • Sep 2019
    • 9

    #1

    Pc powers on, no display no beeps

    Hi, I have a pc I built myself that i built myself. Was running fine but one day it started boot looping. I found out the motherboard was to blame. I got a new one, now my pc powers on but does not boot or beep
    Specs:
    Msi X99s SLI plus
    I7-6800k
    8gb×2 Gskill aegis 3000mhz
    Zotac Gtx 1060
  • Jeff_Law
    PCHF Member
    • Sep 2019
    • 9

    #2
    I already tried resetting ram, change power supply, checked cpu pins, removing gpu, removing setup from case

    Comment

    • Bruce
      PCHF Member
      • Oct 2017
      • 10697

      #3
      PC working - replaced dead mobo - PC not working.
      on that logic, the mobo would be the first thing to check.

      what was the make/model of the old one?
      is the new one compatible with your CPU and RAM?
      have you tried start the PC without the graphics card and using the mobo vid ports?
      what about removing the RAM and starting the PC to really make sure it should beep?
      does the mobo have an internal speaker connected so it can beep?

      Comment

      • Jeff_Law
        PCHF Member
        • Sep 2019
        • 9

        #4
        The old one is a asrock extreme4
        There is no integrated graphics.

        Comment

        • Jeff_Law
          PCHF Member
          • Sep 2019
          • 9

          #5
          When I start without ram, the pc will boot loop
          I connected a external speaker thru the speaker pins

          Comment

          • Bruce
            PCHF Member
            • Oct 2017
            • 10697

            #6
            have you got a model number for that ASRock?
            and the external speaker, you plugged that into the green audio 3.5mm jack or onto the pos and neg of the speaker pins on the front panel header on the mobo?

            Comment

            • Jeff_Law
              PCHF Member
              • Sep 2019
              • 9

              #7
              I plugged into the the speaker pins on the motherboard.

              Comment

              • Jeff_Law
                PCHF Member
                • Sep 2019
                • 9

                #8
                It just says extreme4

                Comment

                • Jeff_Law
                  PCHF Member
                  • Sep 2019
                  • 9

                  #9
                  Actually, its bootlooping → change mobo → starts but no post

                  Comment

                  • Bruce
                    PCHF Member
                    • Oct 2017
                    • 10697

                    #10
                    Changing the mobo may have been too big a hardware change for Windows and a repair install could be required.

                    Comment

                    • Jeff_Law
                      PCHF Member
                      • Sep 2019
                      • 9

                      #11
                      Originally posted by Bruce
                      Changing the mobo may have been too big a hardware change for Windows and a repair install could be required.
                      How do I do that?

                      Comment

                      • Jeff_Law
                        PCHF Member
                        • Sep 2019
                        • 9

                        #12
                        The new motherboard only required a bios update and I did it by paying someone as I didn’t have the cpu.

                        Comment

                        • Bruce
                          PCHF Member
                          • Oct 2017
                          • 10697

                          #13
                          so it’s all sorted now?

                          Comment

                          • phillpower2
                            PCHF Administrator
                            • Sep 2016
                            • 15205

                            #14
                            Thread closed due to lack of feedback from the OP.

                            Comment

                            Working...