Monitor is over scanning

[udaman19]

I have a 2 monitor set-up. Yesterday, one monitir went south. I tried to switch to a single monitor set up using my NVidia card software. Was somewhat successful as I could access the open program I needed that was on the broken monitor. However, for some reason, my working monitor started to over-scan so that the right side is about 20% over the edge of the monitor and that portion is inaccessible. Left side is properly lined up. Resolution is at highest point, so that didn’t help me.

I am using WIN 7. Found another monitor I had, so am back to a 2 screen set-up, with replacement monitor as my main unit, but the other monitor (now secondary) is still over-scanning. Thanks for any help.

[phillpower2]

You have post on a tech forum asking for help but have provided zero information about your computer or it`s hardware, this makes it impossible for anyone to even hazard a guess as to what is going on.

Provide the following information about your computer, is it a custom build or brand name such as Dell or HP, if a brand name, provide the model name or series number (not serial) if a custom build post the brand and model name or number for the CPU, MB, the RAM (including the amount) add on video card if one is used and the PSU (power supply unit) providing these details will enable folk to better help you

[Rustys]

Showing resolved on other forum closed.