HDD BIOS detects not - Live Windows works with - what is wrong?

[MIRKOSOFT]

Hi!

I got old laptop with XP on 60GB IDE HDD and wanted backup to create virtual machine.
I want to use this laptop for MS-DOS and very old Windows versions.
So, I removed harddisk, created backup and virtual machine (there have problem with network, but it is for VBox forum).
Then I connected harddisk back.
First time I was not watching POST and got message: No boot device found, press any key…
So, I reboot and watching POST I saw problem - HDD was not detected by BIOS, so I go to BIOS and correct all possible, repeat it many times but never success.
So, I tried to boot from USB and then DVD live Windows - it boots and I was surprised what I saw in This Computer window - all disk partitions! And even disk management allows me to work with. So, I tried not yet install any OS.
Where do I mistake?

Thank you for help.
Miro

[Madmatt2006]

Hi,

if that’s the case, either HDD is stuffed or the connection to mainboard try another IDE HDD or connector. If you can get BIOS to see it rebuild the BCD.

how old is this thing, can it auto detect hard drive or do have to put in
Cylinder-head-sector
manually

[MIRKOSOFT]

So, if is disk full, reformat helps?
Thank you for help.
Miro

[jmarket]

Stuffed means dead. He’s referring to a dead hard drive

[MIRKOSOFT]

So, how can dead harddisk work in Live Windows on CD?
When I boot from Windows Live DVD and display This Computer all its partition there are untouched - even is possible to work with - copy/move/delete, I tried not yet touch partitions…
HDD has only one problem - BIOS see it not.
I forced it to IDE port as possible as best and helped not, tried few settings in BIOS, helped not too.
For details of HDD: IDE HDD in notebook - 2,5" - 60GB, notebook is old 10 years or more

So, where do I mistake?
Miro

[phillpower2]

So, how can dead harddisk work in Live Windows on CD?

Linux is another program that is often used to recover data from a HDD that will not boot, this because the computer boots from the disk in the optical drive or USB pen drive and not from the HDD itself, it depends on what the actual problem is with the HDD as to whether or not the data can be accessed and just because you can see and recover the data it does not mean that the drive is good.

I forced it to IDE port as possible as best and helped not, tried few settings in BIOS, helped not too.

What boot options and devices are available in the BIOS.

[MIRKOSOFT]

Ok, I understand, your country is UK - as I see flag.
I’m from Slovakia - middle Europe…

I can take screenshot of BIOS, or if it will not work can take photo.
Miro

[phillpower2]

It is not possible to take a screenshot when in the BIOS so a photo or the information just written down then post here will be fine (y)

[MIRKOSOFT]

Here are screenshots of BIOS and BBS POPUP
Miro

[phillpower2]

Sorry to be a pain but we could do with a better picture of the BIOS picture for the Advanced option, we cant see all of the info to the left, we can guess what the options are but that`s not how we work.

[MIRKOSOFT]

OK, here are photos of Advanced page:


Miro

[phillpower2]

Doesn[ICODE]t look promising I[/ICODE]m afraid Miro

What if anything at all happens if you press either the > or Enter key when Primary IDE Master is highlighted.

Have you tried pressing F9 to restore the MBs default factory settings,

[MIRKOSOFT]

You helped me bit - I forgot to write that editing PRI/SEC Slave and SEC Master works, but after choosing PRI Master computer freezes.
I tried defaults and can edit PRI Master - but still not detected - but some progress here is!

Miro

[MIRKOSOFT]

Here are screens:


Miro

[phillpower2]

Sorry to be the bearer of bad news but that effectively confirms that the HDD is bad in some way, if it were a BIOS issue the Matshita DVD drive would not be detected either.

You could try copying your data from the drive and then formatting it.