Gpu Very2 Hard To Detect

[Cat_Man]

Hi, i just wondering why my gpu very hard to detect i already reseat like 20 times, use riser, change other slots and use other pc but very2 hard to detect. i need help with rx570 series all driver good but i found my gpu just 2 pin like cut in half

Spec pc one:
Motherboard: ga-z68ap-d3(f3)
Power supply: 550w

Spec pc two:
Motherboard: forgot
Power supply: 460w

[veeg]

Hello

Check the slot for damage , check the power cables. But that vid card needs at least 500 to 550 watt psu on Spec pc 2. What brand names are those 2 psu’s ?

[Bruce]

G’day, and welcome to the forum. (y)

A broken contact pin could explain your issue.
And as veeg has said, it could also be lack of power.
Any chance you can use the GPU without the riser for now, to test the riser isn’t the cause.

Can you show us a picture of the GPU contact pins?

[Cat_Man]

Hello

Check the slot for damage , check the power cables. But that vid card needs at least 500 to 550 watt psu on Spec pc 2. What brand names are those 2 psu’s ?

I have 650w psu 80 plus bronze

[Cat_Man]

G’day, and welcome to the forum. (y)

A broken contact pin could explain your issue.
And as veeg has said, it could also be lack of power.
Any chance you can use the GPU without the riser for now, to test the riser isn’t the cause.

Can you show us a picture of the GPU contact pins?

[Cat_Man]

fan run but motherboard hard detect gpu even on other pc

[Cat_Man]

Hello

Check the slot for damage , check the power cables. But that vid card needs at least 500 to 550 watt psu on Spec pc 2. What brand names are those 2 psu’s ?

Should i change to other one?

[Bruce]

So you have the same GPU tried in 2 PC’s with the some fault - that would suggest the GPU is at fault.
Can you get your hands on another GPU and see if that one works in your PC?

[Cat_Man]

So you have the same GPU tried in 2 PC’s with the some fault - that would suggest the GPU is at fault.
Can you get your hands on another GPU and see if that one works in your PC?

I remember last time my gpu fan spin full speed and it restart it self but this thread resolved because i put other gpu but i have gpu mining edition and one gpu to make display soo simply i have 2 gpu right now you can see here: https://spec-ify.com/profile/864520ba

[Cat_Man]

I know my old gpu just die after full speed fan

[Bruce]

The link in post #9 says “page not found”.
So you have two add-on graphics cards in the PC?
Which GPU has cables going to the monitor?

Let’s get your system specs.
No personal data is published and everything shown is safe.

Download Speccy by Piriform.
In Speccy, click File > Publish Snapshot > Copy to Clipboard > Close.
Paste that link into your post. Is Speccy safe?

[Bruce]

@Cat Man - any news?

[Bruce]

To re-open, go here, select a Member, click Send direct message and give the thread title.