PC cant get past Post/Boot

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Vore
    PCHF Member
    • Jun 2023
    • 4

    #1

    PC cant get past Post/Boot

    My PC loads all the way till it shows the Gigabyte logo and i can get into the bios/q-flash but it wont load past that it just continues to restart over and over.
    If i remove the GPU and load on the intergrated graphics on the mother board and it boots fine, though i have tried 2 seperate GPU’s and it is the same on both with the restarting.
    I have checked all the cables to make sure everything in connected and the ram sticks individually to see if they are the problem but it doesnt seem like it.
    I have also updated the bios and reset the cmos battery which have not solved anything.
    I’m using a Gigabyte B650 Gaming X AX ATX Motherboard, Ryzen 7700x CPU and a Powercolor Red Devil RX6950XT. The other GPU i tried was an XFX Speedster MERC 319 RX6950XT.

    Any help would be greatly appreciated.
  • phillpower2
    PCHF Administrator
    • Sep 2016
    • 15209

    #2
    We understand that computer issues can be stressful but please do not start more than one thread looking for help with the same issue, this not only wastes helpers time but can also lead to confusion as to who`s and what guidance you are following which in turn can lead to mishaps and potentially irreparable damage to your computer.

    Continue at your first thread here and someone will be with you asap, thank you for understanding.

    This duplicate thread has been closed as per the above.

    Comment

    • georgeks
      PCHF Member
      • May 2017
      • 335

      #3
      When in the BIOS/UEFI what boot devices does it show (if any?..)

      Comment

      • Rustys
        PCHF Member
        • Jul 2016
        • 7862

        #4
        Make and model of the PSU?

        Comment

        • Vore
          PCHF Member
          • Jun 2023
          • 4

          #5
          Originally posted by georgeks
          When in the BIOS/UEFI what boot devices does it show (if any?..)
          Shows the M.2 that I have installed

          Comment

          • Vore
            PCHF Member
            • Jun 2023
            • 4

            #6
            Originally posted by Rustys
            Make and model of the PSU?
            I have the RM850x Corsair

            Comment

            • Rustys
              PCHF Member
              • Jul 2016
              • 7862

              #7
              Originally posted by Vore
              I have the RM850x Corsair
              You power supply is not enough for the card you will have to get a better one. Which explains why it works fine with the onboard and not the display card.
              Originally posted by Vore
              If i remove the GPU and load on the intergrated graphics on the mother board and it boots fine,

              Originally posted by Vore
              Powercolor Red Devil RX6950XT


              [ATTACH type=“full”]12179[/ATTACH]

              Comment

              • Rustys
                PCHF Member
                • Jul 2016
                • 7862

                #8
                Do you still need assistance?

                Comment

                • Rustys
                  PCHF Member
                  • Jul 2016
                  • 7862

                  #9
                  Abandoned closed

                  Comment

                  Working...