pc started lagging out of nowhere

[JDSLVT]

my pc started lagging out of nowhere, last night i was playing some games and i was having stable fps without drops, next day my pc started to feel slower than usual so i tried some games and i had huge fps spikes from 140 to 20-10 every second, i instaled new gpu drivers and its still lagging, no overheating or malwares

my specs:

motherboard ASUS ROG Strix B550-I GAMING

RTX3070Ti asus tuf

RYZEN 9 5900x

2x 1TB 980 samsung ssd

32gb ram kingston fury DDR4

650W Fractal Design Ion 80PLUS Gold

MSI MPG ARTYMIS 343CQR - 3440 × 1440

[veeg]

Hello

Which games were you playing? Did you check those temps while this was going on? Give us your complete psu spec’s..

@Pyro

[JDSLVT]

Hello

Which games were you playing? Did you check those temps while this was going on? Give us your complete psu spec’s..

@Pyro

i was playing beamng and fortnite in both games usually have between 120-150 fps, and max temps around 75-80°C on cpu and 55-60°C on gpu

psu specs:
[ATTACH type=“full”]11923[/ATTACH]

[veeg]

Ok thanks , So you know some of these sites at peak moments. have issues with there servers at peak times. Does this happen at non peak times?

[JDSLVT]

Ok thanks , So you know some of these sites at peak moments. have issues with there servers at peak times. Does this happen at non peak times?

yes it happens even in non peak times

[veeg]

I noticed that your post has only 2 peripherals plugged in . Is this the case when playing games?

[JDSLVT]

I noticed that your post has only 2 peripherals plugged in . Is this the case when playing games?

one monitor, wifi antenna, keyboard, mouse, speakers and soundcard

[Rustys]

The PSU is under powered for the GPU that you are using.

650W Fractal Design Ion 80PLUS Gold

GPU requires a 750 Watt PSU

RTX3070Ti asus tuf

https://www.asus.com/motherboards-components/graphics-cards/tuf-gaming/tuf-rtx3070ti-o8g-gaming/techspec/

[Pyro]

Rustys is right, an underpowered PSU could definitely be your issue.

Even if it’s not, having a good PSU with the proper power rating is never a bad thing - one of the places that going overboard is okay.

Let’s get some more information:

Download and run the free version of speccy.

Once you have ran speccy, follow the instructions to upload a snapshot found here.

To publish a Speccy profile to the Web:
[ol]
[li]In Speccy, click File, and then click Publish Snapshot.[/li][li]In the Publish Snapshot dialog box, click Yes to enable Speccy to proceed.[/li][li]Speccy publishes the profile and displays a second Publish Snapshot dialog box. You can open the URL in your default browser, copy it to the clipboard, or close the dialog box.[/li][/ol]

[Bruce]

@JDSLVT - you logged in yesterday but not updated - still need help?

[Rustys]

Abandoned user has visited the site and not updated thread in any way.