ASUS Q87M-E

[LeandRelee]

After I disabled quick start the pc don’t want to show display motherboard do switch on but don’t boot up

[phillpower2]

Try clearing the CMOS by removing the CR2032 battery from the MB for ten minutes or so an then put it back in.

[COLOR=rgb(184, 49, 47)]The above requires the computer case to be opened so take the following safety precautions 1st, disconnect the power cord from the wall socket, press the case power button for twenty seconds or so to get rid of any residual charge in the system, take anti static precautions before touching anything inside, you can do this by touching a bare metal part of the case or PSU.[/COLOR]

[phillpower2]

Hit and run poster, closed.