CPU EZ Debug light

[Michael_Domka]

My CPU EZ debug light is coming on and my monitor screen is black it does not show a no signal sign.
my secs;
motherboard: B450 tomahawk max II
CPU: Ryzen 5 5600x
AIO Cooler: NZXT Kraken x53
GPU: GeForce RTX 3050
Ram: Corsair Vengeance Pro
Yes, I have my HDMI plugged in to my graphics card not my motherboard.

[Rustys]

Manual page 38
CPU - indicates CPU is not detected or fail

https://download.msi.com/archive/mnu_exe/mb/E7C02v3.1.pdf

When did this start happening?
What were the events leading up to this happening?
What have you attempted and what were the results?
Make and model of the PSU?

Ram: Corsair Vengeance Pro

Make and model

Do you have a motherboard speaker?
What are the beeps and pattern?

[Michael_Domka]

I just finished building it and I don’t believe i have a motherboard speaker there is no patterns and my PSU is a Thermaltake Toughpower GX2 80+ Gold 600W

[Michael_Domka]

It is just a solid red light

[Rustys]

Did you add the proper amount of thermal paste?

Ram: Corsair Vengeance Pro
Rustys:

Make and model

RAM installed into proper ports.

Go through the system and reseat RAM, Display, power cables, data cables, make sure the fans and cooler are plug into the proper places on the motherboard.

Proper BIOS for the CPU you have?

Contact the motherboard manufacture could be an issue with the motherboard.

[Michael_Domka]

Idk what the BIOS is I am new to building PCs I believe that everything is plugged in because all my fans are running and all of my rgbs are on. I had pre placed thermal past on my aio cooler

[Rustys]

BIOS (Basic Input/Output System) is firmware used to provide runtime services for operating systems and programs and to perform hardware initialization during the booting process.

You will have to refer to the manual to confirm that everything is in its proper spots.

[Michael_Domka]

I put everything in the proper spots

[Rustys]

Still waiting on the RAM request

[Michael_Domka]

[HEADING=2]Corsair Vengeance RGB Pro SL 32GB[/HEADING]
I have 4 16GB sticks

[Rustys]

Do you have anything overclocked and also make sure that the BIOS for the RAM is not set to XMP.

I have 4 16GB sticks

Would make 64 GB (4*16=64)

[HEADING=2]Corsair Vengeance RGB Pro SL 32GB[/HEADING]

Where is the 32 GB

May need to update the BIOS
https://www.msi.com/Motherboard/B450...I/support#bios

https://www.msi.com/Motherboard/B450...II/support#cpu

[Michael_Domka]

I don’t have anything overclocked, I don’t even know how, again there isn’t anything on the screen. I also don’t know how to update the BIOS, would I need another computer?

[Michael_Domka]

I bought two 2 packs for my ram

[Michael_Domka]

Also if I have to update my BIOS which one do I download?

[PeterOz]

I would update the bios to start with you need a blank usb

RYZEN 5

Vermeer

5600X

100

3.7GHz

3MB

32MB

B0

65

N/A

7C02vH4.zip

You plug the usb into the flash bios port and press the button - You do not need the cpu and the ram installed to do this.
When you installed the cpu it should have just fallen in - no pressure needed.
See attached pics.
Is your ram speed 3200MHz?
This from MSI
If you have any question during updating BIOS, please contact MSI Service and Support to avoid any damage resulting from improper use or lack of technical expertise.