PC turns on but no display or signal

[Frameless]

Are you talking about a backup battery?

Yes I am referring to a backup battery

Get one that is specific for that processor, otherwise with some you will end up having the same issue. Have also read that some will VOID out the warranty for the CPU.

would still strongly suggest getting the speaker that will help diagnosing issues prior to them becoming costly.

Yeah I’ve already started looking for coolers, one that stood out to me was the deepcool ak400 which seems good and is compatible with the processor

Thanks i will wait for the battery to come just to be sure if for some reason there’s something else

[Rustys]

Outside of the battery dying on them and having to be replaced will only suggest APC.

https://www.apc.com/

[Bruce]

@Frameless - where we at?

[Frameless]

Welp, the bios speaker came and i tried turning the PC in and there was no sound that came from it at all, the PC just booted up and ran without displaying anything like usual

Now I’m just wating for the new CPU to come in to swap it out

[Bruce]

should have got one beep when starting.
one indicates successful POST. but I have seen the rare PC, with speaker, not beep, so there you go!

keep us updated

[Rustys]

Now I’m just wating for the new CPU to come in to swap it out

Which CPU did you end up getting and did you make sure that it was combatable with the RAM and Motherboard?

[Frameless]

Yes I made sure, i ended up getting a 11600k

[Rustys]

Sounds good any idea when the CPU will arrive

[Bruce]

@Frameless - any news?

[Frameless]

My bad, i didn’t see the first reply from rusty, but as i said, just waiting for the cpu to get here and it will get here by next week so it’s gonna take a while

[Bruce]

righto, all good.

[Rustys]

Excellent help you hope that it corrects this.

[Frameless]

UPDATE: PC IS FINALLY UP AND WORKING
Today the processor came in and luckily enough it’s finally up and running perfectly fine. I wanna thank everyone who tried to help on this tedious process on trying to figure out the problem, you guys were so much of help and i can’t thank y’all enough

[ATTACH type=“full”]10814[/ATTACH][ATTACH type=“full”]10813[/ATTACH]

[Rustys]

Great to hear let’s leave the thread open for a couple days and make sure that it stays that way.

You are welcome and thanks for letting us know.

[Bruce]

good news indeed! ???