No Display Signal

[BucketBoy]

Hi,

I’ve turned on my computer and the monitor is saying ‘no display signal’, first time this has ever happened. I switched monitors, same issue, switched from hdmi to dp, same issue. Took out the CMOS battery to reset the BIOS, same issue. So, any help to fix this would be greatly appreciated.

Also I noticed the EZ Debug LEDs have a weird response upon powering on the PC. CPU will blink red then tower turns off. Tower turns on, CPU blinks red and turns off, DRAM holds orange then tower turns off. Tower turns on, CPU blinks red then turns off, CPU blinks orange then turns off, VGA holds white then tower turns off. Tower turns on same as before now VGA blinks white and turns off, however now BOOT will blink green and all LEDs turn off, tower is still on. I’m not sure if this info is of any use but it’s what I noticed upon turning the tower on.

PC was built just over a year ago. RTX 3060 TI GPU, MSI B560M PRO-E motherboard. If you need any more info please share in the comments.

Cheers

[veeg]

Hello

Give us your complete psu spec’s.

[Rustys]

What is the CPU that is in the system?

DRAM holds orange then tower turns off.

Usually signifies a RAM issue.

Lets try
Reseat the RAM.
Use one stick at a time to see if the system gets any further.
Can you access the BIOS and make sure that the setting are correct since to cleared the CMOS
Make sure that the RAM is in the correct ports

[Bruce]

@BucketBoy - any news?

[Bruce]

abandoned