Pc not booting after changing bios settings for windows 11

[TabiRaphy]

Cpu: i3 12100f

Mobo: Asus ex-h610-v3 d4

Ram: 16gb 3200 Kingston fury beast rgb

Gpu: gigabyte eagle oc rtx 3050

Psu: Corsair vs550

My pc was fine until i changed my bios setting, i did a bench test to, it was fine

Until after i put it on the case and i changed the following

I enabled tpm (maybe)
Enabled secured boot
I disable csm
Enabled usb legacy
After that no display and my keyboard lights not ligthing up and all the plugs of the usb. I haved noticed the power led is blinking like Fast then slow for like 4 times then repeat. I haved clear cmos like many times removing the battery and using the cmos header

I was using my old sdd with windows 10 installed into it, it booted into it when i test benched it, i immediately shut off the psu

I really need this pc for my zoom meetings, so i need help now thanks for helping and sorry to my crappy english i hope yall can understand it lol

[PeterOz]

I haved noticed the power led is blinking like Fast then slow for like 4 times

The boar has Qled’s what is the blink pattern on them

[PeterOz]

Power off
Remove ram
add 1 stick only
power on holding del key at same time.
If no good
Power off
switch ram slot
retry
If no good
Switch ram and repeat

[PeterOz]

make sure ram CLICKS into place

[TabiRaphy]

The boar has Qled’s what is the blink pattern on them

It was blinking fast for many times for sec, then for 5-6 seconds it transition to slow blinking for 4 seconds. It’s on the power led

[TabiRaphy]

Power off
Remove ram
add 1 stick only
power on holding del key at same time.
If no good
Power off
switch ram slot
retry
If no good
Switch ram and repeat

I had tried this and doesn’t work i even used my old ram and no signs of life

[PeterOz]

Power LED flashes quickly after power on, flashing 4 times per second (no memory or memory error)
From Here

https://www.asus.com/support/FAQ/1046157/

Also go here scroll down to QLED Core

https://www.asus.com/Motherboards-Components/Motherboards/Expedition/EX-H610M-V3-D4/

[PeterOz]

Take apart and setup MB on a bit of cupboard
Test

[Bruce]

@TabiRaphy - you logged in yesterday but didn’t update - still need help?

[TabiRaphy]

Cpu: i3 12100f

Mobo: Asus ex-h610-v3 d4

Ram: 16gb 3200 Kingston fury beast rgb

Gpu: gigabyte eagle oc rtx 3050

Psu: Corsair vs550

My pc was fine until i changed my bios setting, i did a bench test to, it was fine

Until after i put it on the case and i changed the following

I enabled tpm (maybe)
Enabled secured boot
I disable csm
Enabled usb legacy
After that no display and my keyboard lights not ligthing up and all the plugs of the usb. I haved noticed the power led is blinking like Fast then slow for like 4 times then repeat. I haved clear cmos like many times removing the battery and using the cmos header

I was using my old sdd with windows 10 installed into it, it booted into it when i test benched it, i immediately shut off the psu

I really need this pc for my zoom meetings, so i need help now thanks for helping and sorry to my crappy english i hope yall can understand it lol

Just update bios

I was on the store where i bought this motherboard hoping to get a replacement. They just updated bios then works completely fine so yeah..

[Bruce]

awesome - nice outcome.
thanks for the feedback.