B450m Mortar Max CPU Debug

[Bruce]

@Wax - any news.
you need to keep us updated otherwise we keep going around in this open/closed/re-opened/are you still there loop!

[Wax]

look up your motherboard manufacturers website for the motherboard manual to confirm you had the speaker connected the correct way on JFP2.
did JFP2 have the word ‘speaker’ above it?

what is the make/model of your motherboard?

Sorry my reply didn’t got sent again i did tried it but seems my speakers are not working bc i tried flipping 2 side and didn’t manage to hear beeps my mother board is Mortar Max B450m

[Wax]

Sorry for the inconvenience but i really appreciate the help you are giving i just don’t how to make it work tomorrow I’ll try my cpu on a different motherboard let’s see if it works

[Bruce]

here is your JFP2 header pinout.
[ATTACH type=“full”]9950[/ATTACH]

make sure your are connecting the internal round black speaker accordingly.
red to pin4, black to pin1.

[Wax]

Thank you will try it and update you to it

[Bruce]

@Wax - any news?

[Wax]

Enabled the beep option in bios let’s see what will happen

[Wax]

My m.2 could not boot in bios but i already update my bios latest one

[Wax]

When i put it on the proper ram slot it is still not sending beep codes

[Wax]

Oh i got beep 3 long beep then 1 short beep

[Wax]

Here

[Bruce]

depending on your BIOS manufacturer (AMI, Award, Phoenix, etc) they all say 3 beeps and 1 beep points to memory or graphics card.
so your hurdle is to get it to boot without any beeps.

based on the earlier posts, I’d be guessing you need to try some other memory from somewhere (friend, family, work, neighbour)

[Wax]

Alright I’ll try to borrow somee

[Bruce]

good luck, and get back to us when you try some compatible memory!

[Wax]

But my bios can detect different ram modules but it is not prooceding to my boot drive becuase my mother board could not find my m.2 indicated on my previous post