RGB CPU cooler on a non RGB motherboard

[Internetuser7121]

Hi, i have an Artic rgb cpu cooler but my motherboard doesnt support the rgb, is there any way i can get the rgb anyway ?

[Pyro]

Please supply the model of Motherboard and CPU Cooler.

[Internetuser7121]

Please supply the model of Motherboard and CPU Cooler.

PRIME B660M-K D4 and Arctic Freezer i35 A-RGB

[Pyro]

Looks like there is a RGB header at the bottom (towards the left) of your board.

[ATTACH type=“full”]9533[/ATTACH]

Make sure you plug it into the correct portion of the header, there should be a plastic notch/tab on one side or something of that like.

[Internetuser7121]

Thing is it only has 3 holes(can’t put an image it’s too large of a file

[Pyro]

Does it look like the top or bottom connector from this pictre?-
[ATTACH type=“full” width=“534px”]9539[/ATTACH]

[Internetuser7121]

Bottom

[Pyro]

You might be able to get either an adapter or a RGB hub that goes from 12v 4-pin to 5v 3-pin. Look at the ARCTIC A-RGB Controller or something similar, that should be able to do what you want with some tinkering.

[Internetuser7121]

You might be able to get either an adapter or a RGB hub that goes from 12v 4-pin to 5v 3-pin. Look at the ARCTIC A-RGB Controller or something similar, that should be able to do what you want with some tinkering.

Alright I do that, thanks a lot for your help and quick response ???

[Pyro]

Good luck, I hope you can get your fans working and colorful.