Build pc, nothing on screen

[Rick_n_Roll]

Rog Strix B560-A gamming wifi
InTel core I5 11gen 11400 LGA1200
Corsair vengeance RGB Pro

I press power I hear no beep, get orange light shortly after disappears followed by white light and green. Nothing appears on screen, no signal. The fans and rgb lights all working. I tried removing one ram stick and use the correct slot for 1 stick.

1 possible mistake while building is I manually removed black cover while installing chip instead of putting arm down and have it pop out.

Currently have no graphic card installed motherboard suppose to have one integrated

[Pyro]

Your CPU supports integrated graphics, so not having a GPU installed should not pose an issue.

Removing the socket cover should not have caused any issues assuming you did not bend any pins on accident.

Please give us some more info about your PC:

Where is the light you see?

What are the additional specs, PSU, Operating system, HDD/SSD?

Did you attempt each ram stick alone in the proper slot for 1 module?

[Rick_n_Roll]

Your CPU supports integrated graphics, so not having a GPU installed should not pose an issue.

Removing the socket cover should not have caused any issues assuming you did not bend any pins on accident.

Please give us some more info about your PC:

Where is the light you see?

What are the additional specs, PSU, Operating system, HDD/SSD?

Did you attempt each ram stick alone in the proper slot for 1 module?

Operating system Iwould be windows on motherboard says windows 11 ready
I get orange light for a bit then white and green I get no beeps

[Pyro]

Where is the light you see?

What are the additional specs, PSU, HDD/SSD?

Did you attempt each ram stick alone in the proper slot for 1 module?

[phillpower2]

Same OP started and abandoned elsewhere, closing this thread to save helpers time.