My video card's fan is spinning vrey fast

[Bruce]

if the card is under warranty, and the fact you have no access to a trail card just for testing, I’d return it.

what about the idea of reinstalling Windows afresh?

[Lixon]

if the card is under warranty, and the fact you have no access to a trail card just for testing, I’d return it.

what about the idea of reinstalling Windows afresh?

the card isn’t in warranty anymore, and i reinstall the windows one week ago

[Lixon]

Did you use new thermal paste

yes, i think, but i have 50 degrees when i turn on my computer, the thermal paste is arctic mx-2,

[Rustys]

@Bruce

[Bruce]

I have an external temperature sensor on my onboard video chip and it starts at room temp(obviously), so about mid to high 20’s (celsius) where I live and climbs a degree about every 30secs.

so yours hitting 50 as soon as you turn it on seems very high, very quickly, even factoring in an add-on, high-end card.

what hits 50 by the way, the CPU or GPU?

otherwise, I’m out of ideas.

[PeterOz]

Apply Thermal Paste Click On Me to CPU Everyone has a different method.
The aim is a nice covering Too little = Bad, Too much = Bad (Think Goldilocks and the three bears). Pic attached

[Lixon]

i will replace the thermal paste is one week, is Arctic mx-5 a good paste?

[PeterOz]

From my canned speech about cpu
Buy a Thermal Paste. I use Arctic Silver Click On Me BUT after watching this best Thermal Click On Me you could try This Click On Me

[Lixon]

how tight should the video card screws be? I mean those who needs to unscrew for replacing the thermal paste. sorry for the bad english

[Bruce]

if you can remember the tension it took to unscrew them, try using the same force.
in others words not too tight, kind of like, keep screwing until the screw bites, then give it another quarter turn.

[Rustys]

Any update?

[Lixon]

I replaced the thermal paste 6 times with different tensions, and it happened one time on Fortnite (only for benchmark) the graphics card wasn’t hot 60 degrees or mabye lower and it happened that thing (starts spinning very fast and the monitor is black)
the screws were not too tight, then I tightened the screws quite tightly(one hour ago)
how many times i replace the thermal paste, on the chip is like a little bit of paste (you can see the color of the chip)

[PeterOz]

can you go to control panel >programs and remove Java. Could be 32 and 64 bit editions. Reboot. If java is needed it can be reinstalled latter.
Did you uninstall Windows update KB5001330 ?
also try
Windows 10 Hardware Acceleration
[ol]
[li]Right-click an empty space on your desktop and click on Display settings.[/li][li]Scroll down the Display settings options page to Advanced display settings and open it.[/li][li]In the next window, click Display adapter properties for display 1.[/li][li]The graphics properties window will open. Choose the Troubleshoot tab.[/li][li]Click Change Settings.[/li][li]In the Display Adapter Troubleshooter bar, move the Hardware acceleration pointer to the left to disable hardware acceleration on your PC.[/li][li]Click OK to save your changes and exit.[/li][/ol]

[PeterOz]

on the chip is like a little bit of paste (you can see the color of the chip)

Did you watch the video in post #36?
Also to test can you disable or uninstall avast anti virus and turn on windows defender.
Also I could not see in the previous post have you given your power supply details? make,model and wattage

[Lixon]

Did you watch the video in post #36?
Also to test can you disable or uninstall avast anti virus and turn on windows defender.
Also I could not see in the previous post have you given your power supply details? make,model and wattage

https://www.serioux.ro/produs/sursa-550-w-solas-white-80-white/