Games working smooth only at first launch, second lags after driver reinstall

[phillpower2]

I would not recommend that you run Prime95.

Download Speedfan and install it. Once it’s installed, run the program and post here any information it shows.

http://artellos.geekstogo.com/speedfan.png

So that we have a comparison to Speedfan, download, run and grab a screenshot of HWMonitor (free).

To capture and post a screenshot;

Click on the ALT key + PRT SCR key..its on the top row..right hand side..now click on start…all programs…accessories…paint…left click in the white area …press CTRL + V…click on file…click on save…save it to your desktop…name it something related to the screen your capturing… BE SURE TO SAVE IT AS A .JPG …otherwise it may be to big to upload… after typing in any response you have… click on Upload a File to add the screenshot.

Screenshot instructions are provided to assist those that may read this topic but are not yet aware of the “how to”.

[Vertisso]

Uhm, i don’t know what did happen but i wanted to launch speedfan and the app stopped working causing an… BSOD? I don’t know the error code, it did just flash for half second or something.

Second time it launched but shows only my hard drives.

Does it even support my hardware? Because i’m not sure. Owh and one more question, do i need to post it under load or just in idle?

HWmonitor works good.

[phillpower2]

[COLOR=rgb(44, 130, 201)]Tip
If using a computer and not a mobile phone, please avoid adding multiple posts while waiting for us to reply to your last, edit your last post to include anything that you wish to add, this will ensure nothing gets overlooked which can sometimes happen if a thread has more than one page, it avoids filling up folks inbox and last but not least it amounts to you bumping your thread which is not appropriate and will not get you a reply any quicker.

The steps post did say “post here any information it shows” as not all boards have the same sensors and yes your hardware is compatible with Speedfan.

What happened to the screenshots?

1. Copy any dmp files from C:\Windows\Minidump onto the desktop.
2. Select all of them, right-click on one, and click on Send To> New Compressed (zipped) Folder.
3. Upload the zip folder using the Attach button, bottom left of the dialogue input box

[/COLOR]

[Vertisso]

I don’t have folder like “Minidump” inside the windows folder, even when searching %systemroot%\Minidump the folder can’t be found. The minidump is correctly configured.

[Vertisso]

Screenshots:
Another tabs in speedfan doesn’t show anything.

[phillpower2]

i don’t know what did happen but i wanted to launch speedfan and the app stopped working causing an… BSOD? I don’t know the error code, it did just flash for half second or something.

What happened after this, did the computer turn off or did it work normally.

The only thing that looks off in your screenshots is that the CPU and RAM voltages are too high, you may want to double check the readings with Ryzen Master, the CPU shouldn`t be any higher than 1.325V at idle and the RAM should be 1.2V at idle and 1.35V when XMP kicks in, other than that things look as they should be.

[Vertisso]

On another forum they recommended to me to set instant voltage at 1.35v so i did it and they said to set the clock speed of cpu at instant 4100Mhz. I didn’t adjust the voltage of ram but i keep it in mind when i launch bios.

[phillpower2]

We are always happy to help when we can but we cannot safely do so if you are already receiving assistance on any other forum, doing so may lead to confusion as to whose and what guidance you are following which can be both dangerous and costly, decide on which forum you wish to continue and as a courtesy let the other/s know that assistance is no longer required.

Thank you for your understanding.

Fwiw, I stand by what has been advised about the PSU so feel free to stick at any other forum.

[Vertisso]

I can do everything u want because i stopped to get any answers on another forum that’s the main reason why i’m here. I gonna disable the instant voltage on cpu, and follow your help.

[phillpower2]

Entirely your choice but as said until you have an appropriate PSU you are fighting a losing battle, all I have other than the PSU suggestion is the below;

Try restoring the MBs default factory settings in the BIOS, they are sometimes listed as one of the following " factory defaults" “most stable” or on newer boards “optimized” please note that if you have both the “most stable” and the “optimized” options in the BIOS you should choose the most stable" option as in this instance the “optimized” settings are a form of overclocking that can cause instability

[Vertisso]

Sorry for late response, i did what u suggested, but i got an fix that i never should came on. G-sync compatible was causing such fps drops. How? I have no idea. The games are working great and without lags like that, well sometimes that little lag that isn’t such irritating but i think it comes always on every PC sometimes. Should you know why g-sync compatible can cause things like that?

[Vertisso]

I think i was happy too fast, did run the rdr2, bf5 one more time and the game was even worse…

[phillpower2]

No worries but until you have an appropriate PSU you are wasting your time with this, fingers crossed that nothing has been damaged by the PSU or by you messing with the voltages etc

Will go ahead and close this thread .until you have the new PSU, you won`t get asked for an update that way.