Managed to get it into the slots tried all 3 no luck i dont know if its cause this is a hybrid but the right side looks like its swollen to me or is it meant to be like this ?
Error code d6 z390 meg ace
Collapse
X
-
Had you had any graphics problems leading up to the total failure, reason I ask is because with an overheating GPU you would normally get warning signs such as screen artifacts or other screen distortion, see info here
By the shape of the GPU it looks like the card has been running dry, overheated and burned out
No signs of anything having melted but if the smell is acrid it would suggest that the card had suffered extreme heat.
[COLOR=rgb(44, 130, 201)]NB: Looks to me like that is not the original thermal compound, there is way too much there which has resulted in a right mess and tbh if you purchased the computer used the original owner could have already been having problems and reapplied thermal compound to try and fix it, if that were the factory applied compound it would be thin and even atop of the video chip and the shape of the compound on the base of the heatsink would replicate that of the compound on the video chip, too much thermal compound has been applied in this instance and being that it is conductive it may well have shorted out the card.[/COLOR]Comment
-
-
Did you happen to read my reply #20 at all!
From my reply #5;
Originally posted by phillpower2Not a good choice of PSU for a high end build such as yours, the CX is the budget range of Corsair that are intended for office or school type computers that either use onboard graphics or only the most basic of video cards, a Gold efficiency rated PSU from a quality brand is a must for gaming rigs, the CX also has a bad failure rate, page one of the reviews here is full of complaints.Comment
-
Originally posted by Tomp2009I have been looking at a few psu will order one today took the pc to a pc shop the other day to prove the card was dead powered it up last night worked fine do you think a 750w or 1000w?
As an asides Tomp2009, it would be nice if you acknowledged any questions or suggestions that had previously been made, not doing so gives the impression that you are not particularly interested in what we have to say, our help and time are given for free and all we ask for in return is a bit of courtesy and feedback to any questions that are asked, forums are for learning and sharing knowledge so anything you post could be of help to others, take the info about the thermal compound on the GPU in my reply #20 for example, do you not find it suspicious that the thermal compound was such a mess, I would be and i would want some answers + cash back from where I had purchased the computer as well.
Fwiw, a PSU was previously recommended in my reply #23Comment
-
Sorry if it came across like that I took your advice took the pc to a tech person the gpu had 4 screws in and had more than likely had problems before I had bought the pc just one of them things when you buy second hand I suppose I am looking on a psu as you recommend just hard getting hold of one now with the whole country on lockdown thanks for all your help it’s been really appreciatedComment
-
No worries but when assistance looks like being one way traffic it is annoying, as said previously any feedback good or bad is helpful, if folk don`t acknowledge what has been advised we have no way of knowing if they have taken the information onboard, not fun when that happens as they always look for someone to blame when things go wrong their end
The 650W Seasonic at my earlier link is all that you need for your present build but if you plan on adding more drives or RGB lighting you need to step up to at least 750W, you can get a price for that at the same link as the 650W, you are talking a fair bit more but it is worth it to protect your rather expensive build, an alternative 750W PSU is the Corsair hereComment
Comment