New pc wont work.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Fubar
    PCHF Member
    • Feb 2020
    • 5

    #1

    New pc wont work.

    Hey, I built a gaming rig with the following components:
    MSI GeForce RTX 2070 Super Gaming X Trio 8GB GDDR6 (From a previous pc)
    Intel Core i9-9900K
    Gigabyte Z390 Aorus Master
    Trident Z RGB 16GB (2x8GB) DDR4-3600 MHz CL16
    Samsung 970 EVO Plus 500GB SSD NVMe M.2 (From a previous pc)
    EVGA Supernova g3 850W
    Lian Li PC-O11DX Dynamic
    6x Corsair ll120mm

    It usually only boots at 2-3 try and generally first time the fans on the graphic card go wild.
    So when it boots I can go to the bios and it seems to recognize all of my components.
    But then when I select save and exit It starts to load windows with the “circle balls” rotating then it eventually freezes.
    The pc stays on normally but the image just freezes.

    Solutions Ive tried:
    -Changing RAM position/Only one stick(a different one);
    -Disconnect GPU and try with on board graphics;
    -Factory reset my ssd and try with another one (both with only windows image);
    -A 1200W psu (althoug I am 99% sure the 850W is more than enough)

    What can I try?
    Ive ran out of ideas to do.
    Only my second build and the first one worked at first boot.
    If I had any grammar error Im not a native English speaker xD
  • jmarket
    PCHF Owner
    • Jan 2015
    • 7636

    #2
    Hi @Fubar and welcome to PCHF

    It sounds like your NVMe drive is bad. Have you tried installing Windows onto another drive to verify this?

    Comment

    • Fubar
      PCHF Member
      • Feb 2020
      • 5

      #3
      Sup jmarket Yeah I did
      -Factory reset my ssd and try with another one (both with only windows image);

      Comment

      • jmarket
        PCHF Owner
        • Jan 2015
        • 7636

        #4
        This might sound dumb, but have you tried this on another board to rule out a bad board? I’ve seen it happen, new boards Dead on Arrival.

        Also is this the most up-to-date version of Windows 10? You should be running 1909 now

        Comment

        • Fubar
          PCHF Member
          • Feb 2020
          • 5

          #5
          Nope.
          I dont have a spare mb or cpu

          Comment

          • jmarket
            PCHF Owner
            • Jan 2015
            • 7636

            #6
            What version of Windows is your ISO?

            Comment

            • Fubar
              PCHF Member
              • Feb 2020
              • 5

              #7
              Windows 10 64 bit

              Comment

              • jmarket
                PCHF Owner
                • Jan 2015
                • 7636

                #8
                Is it version 1909? I have a feeling you might be running 1809 or 1903.

                Comment

                • Fubar
                  PCHF Member
                  • Feb 2020
                  • 5

                  #9
                  I dont really know.
                  But will check

                  Comment

                  • phillpower2
                    PCHF Administrator
                    • Sep 2016
                    • 15205

                    #10
                    Any update Fubar?

                    Comment

                    • phillpower2
                      PCHF Administrator
                      • Sep 2016
                      • 15205

                      #11
                      Thread closed due to lack of feedback from the OP.

                      Comment

                      Working...