My PC seems to start, but my monitor doesn't get a signal

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • PlasmaPlay
    PCHF Member
    • Sep 2019
    • 1

    #1

    My PC seems to start, but my monitor doesn't get a signal

    So this started 2 weeks ago, i left the room with my PC on and then i came back one hour later my monitor just sayed it has no signal, so i restarted the Pc, on the first look all seems to be working, all my fans are spinning, all the LEDs on the mainboard and on the case are working, no strange sounds or something like that, but still no signal.
    I plugged my nintendo switch in the HDMI to check the cable and the monitor, and these were working. So my next thought was, that my GPU could be broken, so i went to a friend and build my gpu into his pc and it worked.
    I looked for the error LEDs on my mainboard and none of them are shining.
    So i now have no idea how to find the broken part, i hope some of you guys are having an idea.
    Also i have to mention, my on bord grafic chip never worked, then i plug my screen in the mainboard i dont get a signal too, but this has always been like this, and then i build out the GPU and try to start the pc it does nothing.

    here is my setup:
    • Intel core i7 6700K
    • NVIDIA GTX 1060 6GB
    • 2x 8GB RAM
    • ASUS z170 pro gaming
  • Evan_Omo
    PCHF Member
    • Sep 2016
    • 1257

    #2
    Hi PlasmaPlay, Welcome to PCHF!

    The first thing I would try is to take out one stick of RAM and see if the computer boots up. If there is no difference then try it with the other stick of RAM. If there is stil no difference then it could be a faulty power supply, motherboard, or CPU.

    What power supply does your computer have? Have you tried clearing your motherboards CMOS settings and see if that allows the computer to boot up?

    Let me know. Thanks.

    Comment

    • phillpower2
      PCHF Administrator
      • Sep 2016
      • 15206

      #3
      Any update PlasmaPlay?

      Comment

      • phillpower2
        PCHF Administrator
        • Sep 2016
        • 15206

        #4
        Thread closed due to lack of any feedback from the OP.

        Comment

        Working...