Pc Not Powering Up

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • YeahNahTv
    PCHF Member
    • May 2019
    • 2

    #1

    Pc Not Powering Up

    I’ve recently took my pc apart to clean it and I’ve plugged everything back in at least I think but it’s still not even powering on
  • veeg
    PCHF Director
    • Jul 2016
    • 8982

    #2
    Hello

    In more detail,please go thru by what you mean..(you took the pc apart to clean it).

    Also please give us your complete pc spec’s..

    @Bruce

    Comment

    • YeahNahTv
      PCHF Member
      • May 2019
      • 2

      #3
      I took out my motherboard (i3) and my gt 1030 graphics card cleaned the inside of the pc case and plugged everything back in I’m not sure what the problem as this is my first time doing this I asked my friend and he thinks my mother board has been fried

      Comment

      • Bruce
        PCHF Moderator
        • Oct 2017
        • 10702

        #4
        Unlikely unless it was already faulty.
        And it was all working fine before you took it apart?
        How sure are you that you put it all back together correctly?
        That’s probably a moot question as it doesn’t boot so something has been missed.
        Leave the graphics card out and use the mobo graphics ports.
        Is the RAM in correctly and firmly?
        Did you pull the i3 off the mobo?
        Are you getting any beeps during boot up - did it ever beep beforehand?
        Have you plugged in ALL power cables, 24 pin to the mobo and the 4 or 8 pin (depending on mobo make/model)?

        as vger says, give compete specs.

        Comment

        • Rustys
          PCHF Member
          • Jul 2016
          • 7862

          #5
          Did you remove the CPU or the Heat Sink from the CPU?

          How (used what) to clean?

          Comment

          • phillpower2
            PCHF Administrator
            • Sep 2016
            • 15209

            #6
            Any update YeahNahTv?

            Comment

            • phillpower2
              PCHF Administrator
              • Sep 2016
              • 15209

              #7
              Any update for us? This thread will be closed if not replied to within 48hrs.

              Comment

              Working...