No signal on monitors

[phillpower2]

K, please keep us posted.

[Brinky]

Sorry, by that I meant I take back the fact that it’s working, not the fact that you’ve been very helpful, just re read what I wrote and don’t want it to be take the wrong way

Sent from my iPhone using Tapatalk

[phillpower2]

Aye got that and was referring to the fact that you said in your replies #13 and #15 that your MB was bad, that you would be returning it and was asking you to let us know how things went with the new MB.

[veeg]

Any updates for us?

[Brinky]

Not yet I’m afraid, been busy with work so haven’t sorted it yet [emoji17] will let you all know when I get it done

Sent from my iPhone using Tapatalk

[veeg]

Ok thanks for the update.

[Brinky]

Okay so I finally managed to pick up the new motherboard after missing the delivery.. fitted it in and I’m still having the same problem

Sent from my iPhone using Tapatalk

[Brinky]

Could all this be caused by dead sticks of ram? Maybe one of the ports on the original MB became faulty and killed my ram?

Sent from my iPhone using Tapatalk

[veeg]

Could all this be caused by dead sticks of ram? Maybe one of the ports on the original MB became faulty and killed my ram?

Sent from my iPhone using Tapatalk

Yes it is possible…I suggest you do a memory check and or test each stick.

[Brinky]

I have tried each stick of ram in each port and still nothing, how do I do a memory check?

Sent from my iPhone using Tapatalk

[veeg]

@phillpower2

[Evan_Omo]

Hi Brinky. Did you make sure the RAM is indeed good by testing the RAM sticks in another working system?

Did you try reseating the power cables that are connected to the power supply and motherboard?

[Brinky]

Unfortunately I don’t have another system to test them in but they were working before this issue started, Yes I have reseated all the cables but still nothing, this is also the 3rd motherboard so they have all been reseated a few times

Sent from my iPhone using Tapatalk

[phillpower2]

Okay so I finally managed to pick up the new motherboard after missing the delivery.. fitted it in and I’m still having the same problem

Sent from my iPhone using Tapatalk

Too late now but it would have been best if you had post back before putting anything together as it would have been advised that you do a barebones test outside of the case and obtain a BIOS error speaker first, you can and should still do both but can I just remind you that it could be the CPU that is bad

[Brinky]

I got myself one of those speakers, when starting it up with no sticks of ram it repeatedly beeps, but when starting it up with the ram installed it does a single beep on startup and that’s it, I’m assuming this means the ram is okay and the problem is elsewhere, possibly the cpu as you said? Is there anything I should try?

Sent from my iPhone using Tapatalk