PFN_LIST_CORRUPT

[Baka_Kyun]

Hello! So I’ve just got a 1080ti Aorus and downloaded the software including the RGB thing, I turned the pc off and it blue screened with that error in the title. I’ve done some research and a lot of people say that the gigabyte aorus rbg software was the problem but my pc doesn’t boot anymore after that blue screen, my monitor would be stuck on the brand logo but after some tries it just has a black screen now. How would I get into the system to delete it?

[PeterOz]

reset the cmos to start.
Since you have not told us anything about the computer/motherboard we can’t advise on the best way to perform the reset.

[Baka_Kyun]

reset the cmos to start.
Since you have not told us anything about the computer/motherboard we can’t advise on the best way to perform the reset.

Like take the battery out for a bit? I’ve tried that but I didn’t work, if you want could you name the things you’d like to know so I could find them and give you more info on everything?

[PeterOz]

make and model of motherboard to start
or if a brand named computer E.G dell,hp etc make model and s/n;

[Baka_Kyun]

The computer is a custom built and the motherboard is an Asus B85-Plus R2.0

[PeterOz]

The only manual I can find is not in English.
So, try this.

1. remove the battery again and press on off button a couple of times to drain all power
   wait 5 mins.
   replace
   test.
   If nothing
   Remove video card and cmos battery.
   Do same as above without the video card

So I’ve just got a 1080ti Aorus

So I assume it was working before without this card - onboard video?

[PeterOz]

found this

[PeterOz]

When you removed the battery did you have the main power cord pulled out

[Baka_Kyun]

The only manual I can find is not in English.
So, try this.

1. remove the battery again and press on off button a couple of times to drain all power
   wait 5 mins.
   replace
   test.
   If nothing
   Remove video card and cmos battery.
   Do same as above without the video card

So I assume it was working before without this card - onboard video?

It was working perfectly fine with the 1080 ti, it was only until I shut down the pc and the error message cacre up, I’ve tried putting my old card back in and it still doesn’t work. Tired the cpu display as well but that didn’t work, I’ll try the pin thing now though.

[PeterOz]

make sure to remove power cord

[Baka_Kyun]

make sure to remove power cord

Yes I’m doing that now, but what are jumper cap pins and where are they located on my motherboard? I’ve found what the picture is pointing to and it says to switch them from 1-2 to 2-3 but there are only 2 pins to begin with.

[PeterOz]

Jump to 1m 20sec

[MEDIA=youtube]P8mvZOMJDyI[/MEDIA]

[Baka_Kyun]

So I’ve found something on my board that says CLRTC CHASSIS though it only has 2 pins and I don’t think I know where or even if my motherboard has a jumper. Though I could try and take a photo if you’d like.

[Baka_Kyun]

Jump to 1m 20sec

[MEDIA=youtube]P8mvZOMJDyI[/MEDIA]

Wait I have a spare motherboard that might have a jumper in it 1 sec.

[PeterOz]

Power cord out
battery out
press on button a couple of times to drain power
wait 10 mins battery in
power cord in
power on
holding del key - not tapping