Windows 10 Pc freeze's, black screen

[OgDaBaby]

Yesterday my pc was working good and I did play some Dota This morning I was on the game of Dota had a black screen with no signal on my monitor and my pc keep freezes randomly or keep resetting the screen , black screen and keep restarting sinced so what I did format my harddrive and done Fresh windows 10, I done also Windows Memory Diagnostic test and error checked harddrive test with no errors results. I checked hdmi cable and take out my mobo battery but no luck ♂️ any help greatly appreciated

Water cooled pc

Intel i7 2600
Amd 290 4gb
Gigabyte sniper 2
12gb ddr3
Samsung 860 Evo 250GB SSD
Barracuda 500gb harddrive
Corsair Rm750W Psu

[veeg]

Hello

It almost sounds like the gpu is failing,

@Evan Omo

[phillpower2]

Use the free versions at the following links;

Stress test your GPU with Furmark

Check your FPS etc with SUPERPOSITION

[OgDaBaby]

The GPU can run only 5 minutes after having a black screen on and off or keep restarting but in safe mode my GPU can run longer time

[phillpower2]

Try removing the add on video card from the MBs PCI-E slot and using the MBs HDMI port.

[OgDaBaby]

I think I might fix it my cpu block it’s little lose or dust

[phillpower2]

Sorry but not sure what you mean, are you saying that the CPU cooler was loose and that securing it has fixed the issue.

[OgDaBaby]

Still not working the same issues black screen

[phillpower2]

What did you mean by “my cpu block it’s little lose”

If the heatsink is not securely attached the CPU will overheat and causing all sorts of problems in the process, lose heatsink also means that it will need to be removed, the old thermal compound correctly cleaned, a fresh amount applied and then the heatsink fitted back on properly.

[OgDaBaby]

Is not properly tigth my cpu water block i put new thermal paste still no luck

[OgDaBaby]

And also I have video TDR failure error before.windows loading

[OgDaBaby]

In Safe mode works

[phillpower2]

If the heatink is not mounted correctly as previously mentioned it can cause all sorts of problems, the HS needs to apply even pressure across the whole CPU and if it doesn`t and you have pressure on one part of the CPU but not another it can cause the CPU to malfunction.

The video TDR failure error is driver related and being honest is the least of your worries atm, you need to get the HS issue sorted out asap.

[OgDaBaby]

My cpu block is fitted back on properly. so whats next?

[phillpower2]

We wait to see if you get any more BSOD.