Windows XP Panel based PC help.

  • Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
    We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.

    Why not Click Here To Sign Up and start enjoying great FREE Tech Support.

    This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  • Hello everyone We want to personally apologize to everyone for the downtime that we've experienced. We are working to get everything back up as quickly as possible. Due to the issues we've had, your password will need to be reset. Please click the button that says "Forgot Your Password" and change it. We are working to have things back to normal. Emails are fixed and should now send properly. Thank you all for your patience. Thanks, PCHF Management
Status
Not open for further replies.
S

Ste

PCHF Member
Jan 3, 2018
41
0
55
I have been given a Panel PC that uses XP, It has no HDD but utilises a 1GB COMPACT FLASH car to run programs including windows. However I would like to upgrade that flash card to a 4GB one I have from an old camera.
I have formatted the replacement disc into an NTFS format which is the same as the original, and simply copied everything that is on that original 1GB card onto the new 4GB card. However the system will not BOOT windows XP and is asks to INSERT SYSTEM DISK, I am assuming I have missed out something.
How do make the Panel PC run from the 4GB card.....

xp2.jpg
XP1.jpg
 
Hello

You may have to use exFat and or Fat16 or Fat 32. This will allow the SD card to except any data.. Also i am thinking you will have to make that SD card bootable
 
They are both COMPACT FLASH cards. The original one (left) must be a bootable Card, how do I make the new one (right) bootable ?
 
I have cloned the original card, but the "clone" still wont boot the PC. IS there something I need to alter on that initial screen to instruct the Pc to use the newer card to boot ???
 
  1. Start Rufus. Right click the file and select “Run as Administrator”. Select your SD Card in the “Device” drop down menu. File system should be “Fat32” Check the boxes “Quick Format” and “Create a bootable disk” Select "FreeDOS" for the bootable disk.
  2. Press the “Start” button and wait for it to complete.
https://rufus.ie = Rufus
 
Please excuse my nievity but I cant see the CREATE BOOTABLE DISC option (EOS DIGITAL is the name of the CF CARD i am experimenting with the one I intend to use is 4GB.
Image4.jpg
 
Any update for us? This thread will be closed if not replied to within 48hrs.
 
HI, apologies for my reposting this, I didnt update the response in time, As per original post I have a basic Win XP Panel PC that boots of a 1GB CF card, I am trying to expand that to a 4GB card, but whatever I do to clone/copy the original card, the Panel will not boot.
The pics below are the Boot screen thats displayed when the "Clone" card is inserted, and the lower pic is the PC details.
The panel PC boots instantly when the original 1GB card is inserted.
I have used WIN32 Diskimager, to create an image on the newer 4GB card, that didnt work, and I have also tried RUFUS, and that didnt work.
Any help is very much appreciated. I need the extar
4528



4529
 
OK one step forward, I have managed to clone the original 1GB CF Card using HDD Copy Tool, so that the new 4GB card boots up the panel PC.....BUT even though the card is 4GB only 1GB shows up on the Panel PC itself. I have partioned the card so that the remaining 3GB is named as a different drive, and can be seen when the card is pluigged into my desktop. But inserted into the Panel PC, only the 1GB portion is visible. Am I doing something wrong or is it simply the Panel PC can only handle a 1GB Flash Card.....

The below pics show the CF on my desktop as DISK 4, The lower picture shows the same card plugged into this Panel PC that is giving me the grief....The toshiba drive is a portable USB drive I use to transfer files..
4530


4532
 
As an update here are the specs for the panel PC, it only supports 1GB RAM, does this mean it will only see 1GB of the flash card ????

LCD Size12.1"
Max Resolution1024*768
Brightness (cd/�O)450
Contrast Ratio700:1
LCD Color262K
Pixel Pitch (mm)0.240(H) x 0.240(V)
Viewing Angle (H-V)160/160
Backlight MTBF50000 hrs
SBC ModelAFLMB-LX800
CPUAMD Geode LX 800(500MHz)
ChipsetAMD Geode LX 800 + AMD Geode? CS5536
RAMSupports one 1GB (maximum) 333MHz or 400MHz SO-DIMM
I/O Ports and Switches1 x RS-232 COM port
1 x RS-232/422/458 COM port
2 x RJ-45 for 10/100Mbpa LAN
2 x USB 2.0
1 x power Switch
1 x Reset Button
SSDCF Type II
Watchdog TimerSoftware programmable supports 1~255 sec. System reset
AudioAMP 1.5W + AMP 1.5W
Expansion1 x Mini PCI( Wireless LAN Module )
1 x Bluetooth Module(USB Interface, Bluetooth V2.0)
HDD Drive Bay1 x 2.5" IDE HDD bay or Optional HSDPA Module
Construction MaterialABS + PC Plastic front frame
LED Function1 x Power ON/OFF LED on front panel
MountingPanel, Wall, Rack, Stand or Arm VESA 75mm x 75mm / 100 x 100mm
Front Panel ColorGray 7539U
Dimension (WxHxD) (mm)304 x 246 x 50
Operation Temperature0~50C
Storage Temperature -20~60C
Vibration-5~17Hz 0.1 double amplitute displacement
-17~640 Hz 1.5G acceleration peak to peak"
EMCCE,FCC,CCC
Shock10G acceleration peak to peak(11ms)
Net Weight1.8Kg
IP Level(front panel)IP64
SafetyUL,CB
Touch ScreenResistive Type 5-Wire (touch controller IC is on borard)
Power AdapterP/N:63000-FSP0361AD101C-RS Power: 36W
Input: 90VAC~264VAC @ 50/60Hz
Output:12VDC
Power Requirement12VDC or 18~30VDC
Power Consumption29W
 
The biggest thing is that it is not a actual PC with that in mind it has limited capabilities to what it can and can not do.

There is a possibility that it can only use the 1 GB and you end up loosing the 3 GB.

Keeping that in mind have you tried this since it seems to be working in the Panel. Since you can see both partitions in Windows delete the second partition and then tell it to combine the two together?
 
Rustys said:
The biggest thing is that it is not a actual PC with that in mind it has limited capabilities to what it can and can not do.

There is a possibility that it can only use the 1 GB and you end up loosing the 3 GB.

Keeping that in mind have you tried this since it seems to be working in the Panel. Since you can see both partitions in Windows delete the second partition and then tell it to combine the two together?
Click to expand...

When I clone the original CF card (1GB) and use a 4GB card for some reason that card partitions itself, to a 1GB Card, and the remaining is unallocated. (this is done on my Win10 Desktop PC) I then allocate that remaining partition as in the pic. Then moving the CF card to the panel PC, it simply sees the 1GB section, and nothing else, which makes me think the panel pc can only handle a 1GB flash card. Im hoping you expert chaps can tell me otherwise. If this is the case and it can only handle the 1GB flash can I install software onto a USB based disk, and run it from there ?
 
Status
Not open for further replies.
Top Bottom