URGENT help needed for Reinstalling Windows 10!

  • Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
    We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.

    Why not Click Here To Sign Up and start enjoying great FREE Tech Support.

    This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  • Hello everyone We want to personally apologize to everyone for the downtime that we've experienced. We are working to get everything back up as quickly as possible. Due to the issues we've had, your password will need to be reset. Please click the button that says "Forgot Your Password" and change it. We are working to have things back to normal. Emails are fixed and should now send properly. Thank you all for your patience. Thanks, PCHF Management
Status
Not open for further replies.

smrd79

PCHF Member
Apr 6, 2021
4
0
45
Hi all,

Great to be a part of this site. I was hoping someone can help me, I’d be really grateful for some advice. I was recently preparing my sons PC for sale and after successfully backing up data, I then went through the correct process of resetting, as per the instructions in this link - https://www.laptopmag.com/uk/articles/reset-windows-10-pc

I selected ‘Remove everything’ and then ‘Remove files and clean the drive’.

It then displayed a % progress until the screen displayed the following (see image). It remained on this for 12-14 hours and thought this was far too long and something not right. I switched off the computer and then back on, and again its still displaying this MSI logo screen with the message ‘Press <Del> to run BIOS setup, or <F!!> to run boot menu’.

I have tried both these instructions and is unresponsive. The progress wheel still rotates, and the screen will flash on and off intermittently.

From everything going ticketyboo initially, this unusual looping situation is frustrating. Please can anyone shed any light on why this has happened and how I can simply just reinstall Windows 10 ready for the next user from this.

** It is a gaming PC, so all the parts that make up its whole are as follows…


COMPUTER PC | AMD A8-7650k Radeon R7 | 16 GB Corsair vengeance DDR3 RAM | TOSHIBA DT01ACA200 1 TB Drive | 13 Processor | MSI A68HM GRENADE Motherboard

AMD A8-7650k Radeon R7

16 GB Corsair Vengeance DDR3 RAM

Toshiba DT01ACA200 1 TB Drive

13 Processor

MSI A68HM Grenade Motherboard


Many thanks,
Steve

IMG_5069.JPG
Rows PC9.jpg
Rows PC9.jpg
Rows PC8.jpg
Rows PC8.jpg
Rows PC5.jpg
Rows PC4.jpg
Rows PC3.jpg
Rows PC2.jpg
 

Attachments

  • Rows PC7.jpg
    Rows PC7.jpg
    454.8 KB · Views: 3
since you have all your data backed up and want to wipe the drive and reload Windows, I'd be getting the latest Windows version using the Windows Media Creation Tool (from here), making a bootable USB stick from it and using that to load a fresh version of Win10 onto that PC.

during the install, one of the first screens will prompt you about drives and partitions, take that oppurtunity to remove all the current partitions, leaving the drive 'bare' and allowing Windows to auto setup what it needs.

once installed and you are online, Windows will auto-activate.
you're then good to sell it.
 
  • Like
Reactions: smrd79
Hi we have tried this procedure. We got the media creation tool onto a usb but it's not possible to install it - the pc won't get past the 'no signal' stage. There is no other screen.The pc just isn't connecting to anything! I think it might be a problem with the motherboard? What further can you advise? Thanks
 
have you pressed Del to get into BIOS?
once in, look around and check the hard drive is being detected and is first in the boot order.

something else to try, with the USB with Win10 on it connected, reboot and hit F11 to bring up the boot menu and tell it to boot from the USB stick.

how did you backup the PC, did you play around with the internal drive, cables etc?
if so, is everything back the way it was?
 
We got the media creation tool onto a usb but it's not possible to install it
The media creation tool it software that creates the install software onto the USB for windows 10

You will need to download and run it form a computer following the on screen instructions.
 
  • Like
Reactions: smrd79
have you pressed Del to get into BIOS?
once in, look around and check the hard drive is being detected and is first in the boot order.

something else to try, with the USB with Win10 on it connected, reboot and hit F11 to bring up the boot menu and tell it to boot from the USB stick.

how did you backup the PC, did you play around with the internal drive, cables etc?
if so, is everything back the way it was?
Hi Bruce,

The only thing that displays is what is displayed on the photo I attached of the monitor 'MSI' logo screen. I tried to press DEL as it says and F11 but it is unresponsive.

I backed up the PC in the text book way as of WIndows 10 in the backup section. It worked successfully and have everything safe on external hardrive. No I didnt play with any internal drive or cables.

Thanks
 
Suggestion
In Pic # 4 you can see a little battery.
Remove the power cord from computer.
Touch some metal to earth yourself
flick the little catch to remove CMOS Battery
Press the ON button a couple of times to drain all the power from the board.
Replace the battery (and power)
Turn on and start tapping the DEL key and see if you can enter BIOS.
If you can't lift the battery out easily use a pencil or wooden cooking skewer - Not a metal screwdriver
 
  • Like
Reactions: smrd79
The media creation tool it software that creates the install software onto the USB for windows 10

You will need to download and run it form a computer following the on screen instructions.

Hi Bruce,

The only thing that displays is what is displayed on the photo I attached of the monitor 'MSI' logo screen. I tried to press DEL as it says and F11 but it is unresponsive.

I backed up the PC in the text book way as of WIndows 10 in the backup section. It worked successfully and have everything safe on external hardrive. No I didnt play with any internal drive or cables.

Thanks
Most of this stuff I've already done. It just won't respond to F11 or Del, however long I press on them, so I can't get into the system to follow further instructions. It just keeps showing the logo screen with a little 'eggtimer', then a grey screen with the 'No Signal' message.
It seems maybe the monitor and pc just aren't communicating with each other. Thanks
 
Status
Not open for further replies.