I have this crash that gives me BSOD but when scanning and repairing it gives me the countdown but wont show any percentage
Solved The computer has rebooted from a bugcheck. The bugcheck was: 0x0000004e (0x000000000000008d, 0x0000000000014c7f, 0x0000000000410001, 0xffffba8120769b
- Thread starter Marco Oliveras
- Start date
-
Hi there and welcome to PC Help Forum (PCHF), a more effective way to get the Tech Support you need!
We have Experts in all areas of Tech, including Malware Removal, Crash Fixing and BSOD's , Microsoft Windows, Computer DIY and PC Hardware, Networking, Gaming, Tablets and iPads, General and Specific Software Support and so much more.
Why not Click Here To Sign Up and start enjoying great FREE Tech Support.
This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More. -
Hello everyone We want to personally apologize to everyone for the downtime that we've experienced. We are working to get everything back up as quickly as possible. Due to the issues we've had, your password will need to be reset. Please click the button that says "Forgot Your Password" and change it. We are working to have things back to normal. Emails are fixed and should now send properly. Thank you all for your patience. Thanks, PCHF Management
- Status
Hello
This bugcheck indicates some corrupt drivers.. Have you downloaded any third party software?
This bugcheck indicates some corrupt drivers.. Have you downloaded any third party software?
ok
download and run.. https://www.ccleaner.com/speccy
To post: https://support.piriform.com/hc/en-us/articles/360049015271#saving-speccy-snapshots-0-0
Down load and run and then post that log: https://www.sysnative.com/forums/pages/bsodcollectionapp/
@phillpower2
download and run.. https://www.ccleaner.com/speccy
To post: https://support.piriform.com/hc/en-us/articles/360049015271#saving-speccy-snapshots-0-0
Down load and run and then post that log: https://www.sysnative.com/forums/pages/bsodcollectionapp/
@phillpower2
http://speccy.piriform.com/results/DAPavQXcAdYEmK5Jv6MGav7
I'm having a hard time uploading the bsod log folder is it just the Jcgriff2Log.txt?
I'm having a hard time uploading the bsod log folder is it just the Jcgriff2Log.txt?
Can I ask why you have the above installed on a personal computer.
Edit to add: We can see a couple of things of note in Speccy but we cannot elaborate while not knowing the answer to the question asked.
Honestly I don't know why that's installed on my pc.
After running sysnative it gave me a folder with a bunch of files. I've tried unloading it here but the file is too big to upload. I was wondering I it was a specific file within that folder.
No problem, it has nothing to do with Sysnative and is in fact business related software which is the reason that we had to ask the question of you.
Please uninstall the application, restart the computer, run Speccy again and post the new url for us so that we can confirm that Citrix has gone.
Can I ask that you do not quote every reply as we have to read the full post to make sure nothing gets missed,, thanks.
Please uninstall the application, restart the computer, run Speccy again and post the new url for us so that we can confirm that Citrix has gone.
Can I ask that you do not quote every reply as we have to read the full post to make sure nothing gets missed,, thanks.
Will do!! Here's the The new Speccy link:
No signs of Citrix so all good there, you mentioned BSOD so will address that first;
1. Copy any dmp files from C:\Windows\Minidump onto the desktop.
2. Select all of them, right-click on one, and click on Send To> New Compressed (zipped) Folder.
3. Upload the zip folder using the Attach button, bottom left of the dialogue input box
Regarding your Speccy log, will go through the issues as they are list there;
That is the wrong RAM for your CPU, AMD state here up to 3200MHz and if you have XMP or DOCP enabled the RAM will get auto OCd past what the CPU can handle and the PC fall over.
Go into the BIOS, disable XMP and then manually set the RAM to run at 3200MHz and the voltage to 1.35V.
The below an advisory for your future reference;
You are reaching the minimum safe limit for the amount of free storage space that you need to have, see my canned explanation below;
Fwiw, Windows should have been installed on its own 250GB partition on the drive, it would make things easier to back up and Windows at far less risk of data corruption that way.
1. Copy any dmp files from C:\Windows\Minidump onto the desktop.
2. Select all of them, right-click on one, and click on Send To> New Compressed (zipped) Folder.
3. Upload the zip folder using the Attach button, bottom left of the dialogue input box
Regarding your Speccy log, will go through the issues as they are list there;
That is the wrong RAM for your CPU, AMD state here up to 3200MHz and if you have XMP or DOCP enabled the RAM will get auto OCd past what the CPU can handle and the PC fall over.
Go into the BIOS, disable XMP and then manually set the RAM to run at 3200MHz and the voltage to 1.35V.
The below an advisory for your future reference;
You are reaching the minimum safe limit for the amount of free storage space that you need to have, see my canned explanation below;
Fwiw, Windows should have been installed on its own 250GB partition on the drive, it would make things easier to back up and Windows at far less risk of data corruption that way.
Your most recent crash dmp is more than a week old and therefore of no use, anything more than three days old cannot be relied upon because whatever was causing the crash may have gotten resolved by something like a Windows update, your last crash btw was Windows and not driver related, the issue was with the (PFN) page frame number which in layman's terms is Windows version of memory as in which file or folder goes where etc.
Let us know how things go after you have made the suggested changes and used the PC for a while, couple of days if you have no problems.
Let us know how things go after you have made the suggested changes and used the PC for a while, couple of days if you have no problems.
i have a system error
Volume C: (\Device\HarddiskVolume3) needs to be taken offline to perform a Full Chkdsk. Please run "CHKDSK /F" locally via the command line, or run "REPAIR-VOLUME <drive:>" locally or remotely via PowerShell.
ID 98.
I have a scanning and repairing problem where no percent shows even after chkdsk.
I also bought a new m.2
Afterr the repair is complete im going to see if Acronis could clone windows
Volume C: (\Device\HarddiskVolume3) needs to be taken offline to perform a Full Chkdsk. Please run "CHKDSK /F" locally via the command line, or run "REPAIR-VOLUME <drive:>" locally or remotely via PowerShell.
ID 98.
I have a scanning and repairing problem where no percent shows even after chkdsk.
I also bought a new m.2
Afterr the repair is complete im going to see if Acronis could clone windows
Last edited by a moderator:
Download and run CrystalDisk info standard edition from here
Run the program, grab any screenshots and attach to your next reply for us.
To capture and post a screenshot;
Click on the ALT key + PRT SCR key..its on the top row..right hand side..now click on start...all programs...accessories...paint....left click in the white area ...press CTRL + V...click on file...click on save...save it to your desktop...name it something related to the screen your capturing... BE SURE TO SAVE IT AS A .JPG ...otherwise it may be to big to upload... after typing in any response you have... click Attach file to add the screenshot.
Screenshot instructions are provided to assist those that may read this topic but are not yet aware of the “how to”.
Run the program, grab any screenshots and attach to your next reply for us.
To capture and post a screenshot;
Click on the ALT key + PRT SCR key..its on the top row..right hand side..now click on start...all programs...accessories...paint....left click in the white area ...press CTRL + V...click on file...click on save...save it to your desktop...name it something related to the screen your capturing... BE SURE TO SAVE IT AS A .JPG ...otherwise it may be to big to upload... after typing in any response you have... click Attach file to add the screenshot.
Screenshot instructions are provided to assist those that may read this topic but are not yet aware of the “how to”.
Just noticed that you have started a new thread regarding this, please do not start any more threads that result in helpers time being wasted and causes delays for other members who also need help.
Thread marked and closed as per the above explanation.
Thread marked and closed as per the above explanation.
- Status